User manual SONY DRX-700UL

[. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] LINK device, be sure to refer to the instructions that are provided with that device. LINK data transfer rates are defined as approximately 100, 200, and 400 Mbps, which are respectively denoted as S100, S200, and S400. When devices having different maximum data transfer rates are connected together, rates achieved by individual devices may be less than their rated maximums. It may not fulfill all functional and performance specification under other OS (operating system) environment. If your computer is not equipped with a USB connector, install a USB interface card. These instructions apply to most commonly used computers. Connect the necessary cables, then turn on the drive. Then connect the AC adapter to the drive's DC IN jack, and connect the power cord to the power outlet. * If your drive equipped with an AC IN connector instead of a DC IN connector, connect the provided AC power cord directly. AC power cord To AC power outlet Connect the other end of the USB cable to your computer. When the computer is ready, confirm that the drive is detected. Insert the supplied software disc into the DVD/CD RW drive and install the writing software. The disconnection procedure varies according to your operating system. windows 2000 When your computer successfully detects the drive , appears on the Windows taskbar. When you want to disconnect the drive, you must first stop it using this icon. If the generic software you are using does not detect the drive correctly, visit the Web site of the software manufacturer and update the software, as this may solve the problem. Depending on the disc that you insert into the drive, playback may start, or you may have to double-click its icon in the [My Computer] window to display a list of the files and folders it contains. Hint You can also right-click the drive icon in the [My Computer] window, and then click [Open] on the shortcut menu that appears to display the contents of the disc in the drive. The following discs are compatible with the drive. Depending on your software and media, this speed may vary. Only round discs should be used with this drive. Attempting to read odd-shaped discs (stars, hearts, card shape, etc. [. . . ] To protect important data, always keep discs in their protective cases. Do not wipe writable discs to clean them before recording data. Instead, use a blower to remove any dust. Data may not record properly if a scratch or dust is present on the unrecorded area of writable discs. [. . . ]