User manual SONY CYBER-SHOT DSC-F717

[. . . ] 3-078-045-13(1) Digital Still Camera Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Getting started________________________ Shooting still images __________________ Viewing still images ___________________ Deleting still images __________________ Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. DSC-F717 Serial No. Before advanced operations _____________ Advanced still image shooting ___________ Advanced still image viewing ____________ Still image editing ______________________ Enjoying movies _______________________ Enjoying images on your computer_________ Troubleshooting _______________________ Additional information___________________ DSC-F717 © 2002 Sony Corporation Index WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION The use of optical instruments with this product will increase eye hazard. [. . . ] Deleting scenes A and B if they are unnecessary. 101_0004 1 3 A 2 101_0006 101_0007 B d Select [DIVIDE] with B, then press z. Next, select [OK] with v, then press z. The playback of the movie starts. DELETE DELETE 4. Only the desired scenes remain. 1 3 2 101_0006 79 e Decide on a cutting point. Press the center z at the desired cutting point. 60min DIVIDE 160 101 10/10 00:00:02 DIVIDING POINT cC OK CANCEL EXIT OK · The cut movie are recorded as the newest files in the selected recording folder. · You cannot cut the following files. ­ Clip Motion files ­ Multi Burst files ­ Still image files ­ MPEG movie files not long enough to cut ­ Protected MPEG movie files · You cannot restore files once you cut them. · The original file is deleted when you cut it. Deleting unnecessary portions of movies a Cut an unnecessary portion of a movie (page 79). b Display the portion of the movie you want to delete. c Press MENU. The menu appears. When you want to adjust the cutting point, use [c/C] (frame forward/ rewind) and adjust the cutting point using b/B. If you want to change the cutting point, select [CANCEL]. The playback of the movie starts again. d Select [DELETE] with b/B, then press z. e Select [OK] with v, then press z. The movie currently displayed on the screen is deleted. f When you have decided on a cutting point, select [OK] with v/V, and press z. g Select [OK] with v, then press z. The movie is cut. The recording folder appears at the upper right of the screen. To cancel cutting In Step 5, select [EXIT]. The movie appears on the screen again. 80 Enjoying images on your computer Copying images to your computer -- For Windows users Recommended computer environment OS: Microsoft Windows 98, Windows 98SE, Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition, or Windows XP Professional The above OS must be installed at the factory. Operation is not assured in an environment upgraded to the operating systems described above or in a multi-boot environment. CPU: MMX Pentium 200 MHz or faster USB connector: Provided as standard Display: 800 × 600 dots or more High Color (16-bit color, 65, 000 colors) or more · If you connect two or more USB equipment to a single computer at the same time, some equipment, including your camera, may not operate depending on the type of USB equipment. · Operations are not guaranteed when using a USB hub. · Operations are not guaranteed for all the recommended computer environments mentioned above. · This camera is compatible with USB 2. 0. The USB 2. 0 interface is completely compatible with USB 1. 1, so USB 1. 1 equipment can also be used. · Use with a USB 2. 0 (High Speed) compatible computer environment allows high-speed data transfer (approximately 1. 5 times faster than the conventional Sony model DSC-F707). Contents of the CD-ROM x USB Driver This driver is needed in order to connect the camera to a computer. · When using Windows XP, you need not install the USB driver. USB mode There are two modes for a USB connection, [NORMAL] and [PTP]* modes. The factory setting is the [NORMAL] mode. * Compatible only with Windows XP. When connected to a computer, only the data in the folder selected by the camera is copied to the computer. [. . . ] 14 battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Print (DPOF) mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]