User manual SONY CYBER-SHOT DSC-G3

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Press the MENU button to enter the [Capture] menu and select [Scene] by using the / button. Press the OK button to enter the sub-menu. After entering the sub-menu, select [Night Scene] by using the / button. Press the OK button to confirm the setting. LCD monitor will display [ ] as Night Scene icon. To exit from the menu mode, use the / button to select [Exit] and press the OK button. 5M Note: In [ In [ ] Night Scene mode, Flash mode will automatically detect the ambient lighting. If the surrounding A brightness is low, the flash will fire to [ ] Red-eye reduction. ] Night Scene mode, ISO speed cannot be set. For other settings like Language, Power Off time or others, choose [Setup] in Capture/Video/Playback menu. 36 Portrait Mode Taking pictures by selecting [ ] Portrait mode helps you to construct portraits in which the main subject stands out sharply and clearly while indistinct background's details. Press the MENU button to enter the [Capture] menu and select [Scene] by using the / button. Press the OK button to enter the sub-menu. After entering the sub-menu, select [Portrait] by using the / button. Press the OK button to confirm the setting. Press the MODE button twice to enter [ ] Playback mode. The last recorded image appears on the LCD monitor. View and select your recorded images by using the / button. To view the previous image, press the button. To view the next image, press the button. 2 of 10 Note: To exit [ ] Playback mode, press the MODE button. If there is no image stored in the internal memory or on the memory card, [No Image] message will appear on the LCD monitor. During playback, the recorded image appears to be larger than the one on preview in capture mode. 41 Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. Press the MODE button twice to enter [ ] Playback mode. The last image frame appears on the LCD monitor. View and select your images by using the / button. [. . . ] Measure Recharge or use the AC power adapter. Toggle the MODE button to shooting mode. Load a new card, or delete unwanted files. Wait until the flash recharging process is completed. [. . . ]