User manual SONY CYBER-SHOT DSC-J10

[. . . ] The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. To reduce fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] R RESET button S Lock release lever for USB arm T (USB) arm U USB arm cover The battery pack is built into the camera. Charge the camera before using for the first time. USB arm The USA and Canada Lock release lever for USB arm Dedicated USB connection support cable (supplied) The lock release lever for 2 SlideUSB arm cover opens as shown in USB arm. Pull out the cable, and then lay the USB arm with finger. Be careful not to pinch your finger in the USB arm. ⷠIf the USB arm cover is closed, open the USB arm cover and lay the USB arm. Do not push the USB arm when the USB arm cover is closed. ⷠUse a nearby wall outlet (wall socket) when using the supplied AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the camera. ⷠWhen charging is finished, disconnect the dedicated USB connection support cable (supplied) from the computer, or the AC Adaptor from the wall outlet (wall socket). ⷠMake sure to use the supplied AC adaptor or the supplied dedicated USB connection support cable for charging. ⷠIf the Power/Charge lamp does not light up even after connecting the AC adaptor to the camera and the wall outlet (wall socket), the battery pack is in charging standby condition as the ambient temperature is out of the appropriate range. Charging starts and the lamp lights up when the ambient temperature becomes appropriate for charging. You can charge the battery pack with the dedicated USB connection support cable. 2 Connect the camera to the computer that is turned on with the dedicated USB connection support cable (supplied). The Power/Charge lamp may turn off when the temperature is outside of the recommended operating temperature (10°C to 30°C (50°F to 86°F)). 3 When charging is finished, delete the USB connection between the camera and computer. note · Be careful also of the following points: ­ When you connect the camera to a laptop computer that is not connected to an AC power source, the battery of the laptop computer may be depleted rapidly. do not leave the camera connected to the computer for a long time. ­ Do not perform start-up, restart, resuming from sleep mode, or shut-down operations on your computer while the camera is connected. Disconnect the camera from the computer before performing these operations. ­ Charging the battery with customized or hand-built computers is not guaranteed. [. . . ] Easy Mode Share it Later Slideshow View Mode Retouch Delete Protect Rotate Select Folder Set the text-size increased and all indicators become easier to see. Select a folder containing the images you want to play back. If you press the MENU button while shooting or during playback, (Settings) is provided as a final selection. Number of still images and recordable time of movies The number of still images and recordable time may vary depending on the shooting conditions. [. . . ]