User manual SONY CYBER-SHOT DSC-P150

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] E Select the desired size with v/ V, then press z. Select [Cancel] in step 4 or select [Exit] in step 8, then press z. You cannot change the size of movies or Multi Burst images. When you change from a small size to a large size, the image quality deteriorates. You cannot resize to an image size of 3:2. When you resize a 3:2 image, the upper and lower black portions will be displayed on the image. Select the image to be unprotected with v/V/b/B in step 5, then press z. Repeat this operation for all images that are to be unprotected. B Display the image you want to resize with b/B. D Select (Resize) with b/B, then press z. You can mark still images shot with your camera that you want to have printed. This function is convenient when you have images printed at a shop or using a printer that conforms with the DPOF (Digital Print Order Format) standard or a PictBridge compliant printer. B Display the image you want to mark with b/B. (DPOF) with B, then D Select [Select] with b/B, then press z. E Select the image you want to mark with v/V/b/B, then press z. E To continue and mark other images, display the desired image with b/B, then press z. When you mark images shot in Multi Burst mode, all the images are printed on one sheet divided into 16 panels. Select the images to be unmarked with v/ V/b/B in step 5, then press z. Select [All In This Folder] in step 4, then press z. Select [Cancel] in step 4 or select [Exit] in step 8. Even if you do not have a computer, you can easily print images shot using your camera by connecting the camera to a PictBridge compliant printer. For preparation, you only set the USB connection on the SET UP screen and connect the camera to the printer with the cable for multi-use terminal (USB). [. . . ] The "InfoLITHIUM" battery pack calculates the power consumption according to the operating conditions of your camera, and displays the remaining battery time in minutes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50° F to 86° F). You may not be able to efficiently charge the battery pack outside of this temperature range. "Memory Stick PRO" with a capacity up to 1GB have been confirmed to operate properly with this camera. [. . . ]