User manual SONY CYBER-SHOT DSC-T100/R

[. . . ] Digital Still Camera Instruction Manual DSC-T100 GB For details on the advanced operations, please access "Cyber-shot Handbook" and "Cyber-shot Stepup Guide" contained on the supplied CD-ROM via a computer. Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. © 2007 Sony Corporation 2-319-290-12(1) Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ______________________ IMPORTANT SAFEGUARDS For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. [. . . ] Battery pack Slide the battery eject lever. Be sure not to drop the battery pack. · Never remove the battery pack/"Memory Stick Duo" when the access lamp is lit. This may cause damage to data in the "Memory Stick Duo". 11 3 Turning the camera on/setting the clock POWER button Lens cover Control button 1 2 HOME button z button 3 1Press the POWER button or slide the lens cover downward. 2Set the clock with the control button. 1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK], then press z. [ To change the date and time Press the HOME button, and select [ Clock Settings] in (Settings) (page 17). [ When you turn on the power If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function). 12 Shooting images easily (Auto adjustment mode) The following procedure is for shooting a still image. Shutter button Zoom button MENU button Control button Tripod receptacle (bottom) HOME button DISP button Flash button Macro button Self-timer button Lens cover Lens Microphone Flash Self-timer lamp 1Slide the lens cover downward. 2Hold the camera steady, keeping your arm at your side. Position the subject in the center of the focus frame. 3Shoot with the shutter button. Still image: 1 Press and hold the shutter button halfway down to focus. The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and remains lit. 2 Press the shutter button fully down. The shutter sounds. AE/AF lock indicator Movie: Press the HOME button, and select [ Movie Mode] in (Shooting) (page 17). 13 Zoom/Flash/Macro/Self-timer/Display [ Press Using the zoom to zoom, press to undo zoom. [ DISP Changing the screen display Press v (DISP) on the control button. Each time you press v (DISP) button, the display changes as follows. Brightness of LCD backlight up r Histogram on r Indicators off r Indicators on [ Flash (Selecting a flash mode for still images) Press B ( ) on the control button repeatedly until the desired mode is selected. : Flash Auto Strobes when there is insufficient light or backlight (default setting) : Flash forced on SL : Slow synchro (Flash forced on) The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light. : Flash forced off [ Macro/Close Focus (Shooting close-up) Press b ( ) on the control button repeatedly until the desired mode is selected. 8 cm or farther (3 1/4 inches or farther), T side: Approx. 80 cm or farther (31 1/2 inches or farther)) :Close focus enabled (Locked to the W side: Approx. 1 to 20 cm (13/32 to 7 7/8 inches)) [ Using the self-timer Press V ( ) on the control button repeatedly until the desired mode is selected. : Not using the self-timer : Setting the 10-second delay self-timer : Setting the 2-second delay self-timer Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates. 14 Viewing/deleting images (Playback) button (Index)/ (playback zoom) button (playback zoom) button MENU button Control button Multi connector (bottom) HOME button 1Press (Playback). If you press when the camera is powered off, the camera is turned on automatically and set to playback mode. To switch to the shooting mode, press again. 2Select an image with b/B on the control button. Movie: Press z to play back a movie. (Press z again to stop playback. ) Press b/B to rewind/fast forward. (Press z to return to normal playback. ) Press V to display the volume control screen, then press b/B to adjust the volume. [ To delete images 1 Display the image you want to delete, then press MENU. 2 Select (Delete) with v and select [This Image] with b/B, then press z. 3 Select [OK] with v, then press z. [ To view an enlarged image (playback zoom) Press while displaying a still image. Adjust the portion: v/V/b/B Cancel playback zoom: z 15 [ Viewing an index screen Press to display the index screen while a still image is displayed. To return to the single image screen, press z. · You can also access the index screen by selecting [ Index Display] on the HOME screen. [. . . ] However, even if this rechargeable battery is not charged, you can still use the camera as long as you do not record the date and time. Charging method of the internal rechargeable backup battery Insert charged battery pack in the camera, and then leave the camera for 24 hours or more with the power off. [ On cleaning Cleaning the LCD screen Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Cleaning the lens Wipe the lens with a soft cloth to remove fingerprints, dust, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. [. . . ]