User manual SONY CYBER-SHOT DSC-T3

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] When Multi Burst images are played back on a computer or on a camera without the Multi Burst function, the 16 frames you shot will be displayed at the same time as part of one image. When using this mode, you cannot delete only certain frames. When you delete images, all 16 of the frames are deleted at the same time. This function protects images against accidental erasure. Display the image you want to protect with /. Select the image you want to protect with ///, then press . Note that formatting the "Memory Stick Duo" erases all the data in the "Memory Stick Duo" even if images are protected, and these images cannot be recovered. It may take some time to protect the images. To continue and protect other images, select the desired image with /, then press . You can change the image size of a recorded image, and save it as a new file. You can resize to the following sizes: 5M, 3M, 1M, VGA The original image is retained even after resizing. Select the desired size with /, then press . Select [Cancel] in step or select [Exit] in step , then press . You cannot change the size of movies or Multi Burst images. When you change from a small size to a large size, the image quality deteriorates. You cannot resize to an image size of 3:2. When you resize a 3:2 image, the upper and lower black portions will be displayed on the image. Select the image to be unprotected with /// in step , then press . Repeat this operation for all images that are to be unprotected. Display the image you want to resize with /. You can print images shot with your camera by the following methods. You can print using a "Memory Stick" compatible printer. [. . . ] Do not expose the battery pack to water. The battery pack is not water-resistant. Do not leave the camera in a hot location such as inside a hot car or exposed to direct sunlight. The power may go off although the battery remaining indicator shows there is enough power to operate. [. . . ]