User manual SONY CYBER-SHOT DSC-T33 annexe 1

[. . . ] 2-548-269-11 (1) Getting started ______________________ Digital Still Camera Operating Instructions Owner's Record Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] Note that the original movie is deleted when you cut it. <Example> Cutting a movie numbered 101_0002 101_0001 1 2 101_0002 101_0003 3 To cancel deletion Select [Exit] in step or . · To delete all the images in the folder, see page 51. 1. Cutting scene A. 1 A 2 101_0002 B 3 Divide point The file numbers assigned when movies are cut The cut movies are assigned new numbers and recorded as the newest files in the selected recording folder. The original movie is deleted, and that number is skipped. 2. Cutting scene B. 101_0004 1 3 A 2 101_0005 B Divide point 3. Deleting scenes A and B if they are unnecessary. Enjoying movies 101_0004 1 3 A 2 101_0006 101_0007 B Delete Delete 4. Only the desired scenes remain. 1 3 2 101_0006 87 Control button MENU Mode switch Decide on a cutting point. Press the center at the desired cutting point. 60min Divide Dividing Point OK Cancel Exit 640 STD 101 10/10 00:00:02 · You cannot cut the following images. ­ Still image ­ Movies not long enough to cut (about more than two seconds) ­ Protected movies · You cannot restore files once you cut them. · The cut movies are recorded as the newest files in the selected recording folder. Set the mode switch to . Select the movie you want to cut using /. Press MENU. The menu appears. When you want to adjust the cutting point, use [/] (frame rewind/ forward) and adjust the cutting point using /. If you want to change the cutting point, select [Cancel]. The playback of the movie starts again. When you have decided on a cutting point, select [OK] with /, and press . The movie is cut. Select (Divide) with , then press . Next, select [OK] with , then press . The playback of the movie starts. To cancel cutting Select [Exit] in step or . The movie appears on the screen again. 88 Copying images to your computer -- For Windows users Recommended computer environment OS: Microsoft Windows 98, Windows 98SE, Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition, or Windows XP Professional The above OS must be installed at the factory. Operation is not assured in an environment upgraded to the operating systems described above or in a multi-boot environment. CPU: MMX Pentium 200 MHz or faster USB connector: Provided as standard Display: 800 × 600 dots or more High Color (16-bit color, 65, 000 colors) or more · This camera is compatible with Hi-Speed USB (USB 2. 0 compliant). · Connecting with a USB interface that is compatible with Hi-Speed USB (USB 2. 0-compliant) allows advanced transfer (highspeed transfer). · If you connect two or more USB equipment to a single computer at the same time, some equipment, including your camera, may not operate depending on the type of USB equipment. · Operations are not guaranteed when using a USB hub. · Operations are not guaranteed for all the recommended computer environments mentioned above. When a USB connector is not provided on your computer When neither a USB connector nor a "Memory Stick" slot is provided, you can copy images using an additional device. http://www. sony. net/ Contents of the CD-ROM USB Driver This driver is needed in order to connect the camera to a computer. When using Windows XP, you need not install the USB driver. Picture Package This application is used to transfer images from the camera to a computer easily. [. . . ] · Do not leave the camera in a hot location such as inside a hot car or exposed to direct sunlight. Remaining battery time indicator The power may go off although the battery remaining indicator shows there is enough power to operate. Use the battery pack up and charge the battery pack fully again so that the indication on the battery remaining indicator is correct. Note, however, that the correct battery indication sometimes will not be restored if the camera is used in high temperatures for a long time or left in a fully charged state, or the battery pack is frequently used. What is the "InfoLITHIUM" battery pack? The "InfoLITHIUM" battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camera and the AC Adaptor. The "InfoLITHIUM" battery pack calculates the power consumption according to the operating conditions of your camera, and displays the remaining battery time in minutes. How to store the battery pack · Even if the battery pack will not be used for a long time, fully charge it and use it up once per year. [. . . ]