User manual SONY CYBER-SHOT DSC-T70HDPR

[. . . ] Digital Photo Printer DPP-FPHD1 Operating Instructions Before operating this printer, please read this manual thoroughly and retain it for future reference. Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. DPP-FPHD1 Serial No. © 2007 Sony Corporation 3-273-243-11(1) WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. Notice If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc. ) again. For Customers in the U. S. A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. [. . . ] Make sure to spare enough space behind the printer, such as by using the paper protector, etc. , during printing. · If print paper runs out during continuous printing or if you print with no print paper in the paper tray, the printer's ERROR indicator lights. Feed the print paper without turning off the power and resume printing. 2 Select the image you want to print by pressing b/B. · You can print an image by selecting it from the index screen. On the ACCESS indicator The ACCESS indicator shows the connection status between the printer and the camera as follows: · When the indication lights: The connection between the printer and the camera is established. · When the indication flashes: The image to be printed is damaged. 3 Press the PRINT button on the remote control. The image will be printed. The "Printing. . . " screen disappears when printing is complete. To change the print settings When you attempt to print from the menu of the camera, the print setting screen appears. · You can select from the following print modes: ­ Index print ­ Border/Borderless print* ­ Date print * When you specify border print for 16:9 size images, you can print the full images without margins being cut off. (t page 30) · For details on printing, refer to the Cyber-shot Handbook. · You can play back and review images on a TV when printing the images. (t page 18) PNotes on printing · Never move or turn off the printer while it is printing; the ink ribbon or paper may become stuck. In case you turn off the power, keep the paper tray inserted and then turn on the printer. If paper being printed remains in the printer, remove the paper that emerged automatically and resume printing from the step 1. 19 Charging the battery pack Turn off the camera and place the camera with the battery pack inserted on the camera adaptor. The CHARGE indicator of the camera adaptor lights up. · When the camera is turned on, the camera adaptor stops charging the battery pack. · When the charging reaches to Normal charge*, the CHARGE indicator goes off. * Recording and playback time with Normal charge is approximately 90% of Full charge. · The time of the full-charge for a completely discharged battery at the temperature of 25 °C (77 °F) is approximately 170 minutes. It may take longer to charge depending on the charging condition and environment. · You may not be able to turn off the printer, even when you press the 1 (on/standby) button on the remote control. If the motor in the printer is still running, turn off the camera after the motor stops running. You cannot charge the battery while the motor is running. · If CHARGE indicator fails to light or blinks for more than 10 seconds, refer to "Troubleshooting". · After attaching the camera to the camera adaptor, the CHARGE indicator may flash for 3 to 10 seconds. This indicates communication between the camera and the camera adaptor, and it is not a malfunction. Charging temperature The temperature range for charging is 0 °C to 40 °C (32 °F to 104 °F). However, to provide maximum battery efficiency, the recommended temperature range when charging is 10 °C to 30 °C (50 °F to 86 °F). 20 Troubleshooting If trouble occurs If you run into any problems using the printer, use the following guidance to solve the problem. [. . . ] · Avoid placing the printer in a location subject to: ­ ­ ­ ­ ­ vibration high humidity excessive dust direct sunlight extremely high or low temperatures On transport When you transport the printer, remove the ink ribbon, paper tray or AC adaptor, from the printer and put the printer and its peripherals in the original box with the protective packaging. If you no longer have the original box and packing parts, use similar packing material so that the printer will not be damaged while being transported. · Do not use electrical equipment near the printer. The printer will not work properly in electromagnetic fields. · Do not place heavy objects on the printer. [. . . ]