User manual SONY CYBER-SHOT DSC-TF1/L

[. . . ] 4-452-084-21(1) Digital Still Camera / Instruction Manual Cámara fotografía digital / Manual de instrucciones GB ES DSC-TF1 English Learning more about the camera (“Cyber-shot User Guide”) “Cyber-shot User Guide” is an on-line manual. Refer to it for in-depth instructions on the many functions of the camera. 3 Search for the model name of your camera within the support page. € Check the model name on the bottom of your camera. [. . . ] € The number of images that can be recorded is for shooting under the following conditions: – Using Sony microSD memory card (Class 4 or faster) (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). € The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – [Disp. € The flash strobes once every two times. € The power turns on and off once every ten times. 4200 images GB 15 • The battery life for movies is based on the CIPA standard, and is for shooting under the following conditions: – Recording mode: 1280×720 – “Actual shooting (movies)”: Indicates the approximate shooting time as a guideline when you repeatedly perform shooting, zooming, standby for shooting, and turning on and off the camera. € “Continuous shooting (movies)”: When continuous shooting ends because of set limits (29 minutes), press the shutter button again to continue shooting. Shooting functions such as the zoom do not operate. X Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor (supplied), using the dedicated USB cable (supplied). You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the dedicated USB cable. In addition, you can use the AC Adaptor AC-UD10 (sold separately) or ACUD11 (sold separately) to supply power when shooting. Notes • Power cannot be supplied when the battery pack is not inserted in the camera. € When the camera is connected directly to a computer or to a power outlet using the supplied AC Adaptor, power supply is available only in playback mode. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the dedicated USB cable. € If you connect the camera and a computer using the dedicated USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. Press the (Playback) button to switch to the playback screen. € The AC Adaptor AC-UD11 (sold separately) may not be available in some countries/regions. GB 16 Inserting a memory card (sold separately) GB “Memory Stick microSD memory Micro” media (M2) card Make sure that the correct side is facing up. printing surface Terminal 1 Open the cover. The memory card (sold 2 Insertthe camera lens facing upward, separately). The memory • With as illustrated, insert card straight in until it clicks into place. € If you push forcefully on the microSD memory card (in the direction of the battery insertion slot) while inserting it, you may damage the camera. € Be careful when removing the microSD memory card, as it may pop out quickly. [. . . ] Unauthorized recording of such materials may be contrary to the provisions of the copyright laws. No compensation for damaged content or recording failure Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: – Do not expose the camera to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide. [. . . ]