User manual SONY CYBER-SHOT DSC-TX10

[. . . ] 4-265-636-13(1) Digital Still Camera Instruction Manual DSC-TX10 English Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. ______________________________ Model No. [. . . ] Charging may take longer depending on conditions of use and circumstances. x Battery life and number of still images you can record and view Battery life Shooting (still images) Viewing (still images) Shooting (movies) Notes · The above number of still images applies when the battery pack is fully charged. The number of still images may decrease depending on the conditions of use. · The number of still images that can be recorded is for shooting under the following conditions: ­ Using Sony "Memory Stick PRO Duo" (Mark2) media (sold separately) ­ The battery pack is used at an ambient temperature of 25°C (77°F). · The number for "Shooting (still images)" is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) ­ [Panel Brightness] is set to [3] Approx. 3800 images -- GB 14 ­ Shooting once every 30 seconds. ­ The zoom is switched alternately between the W and T ends. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. · The battery life for movies applies shooting under the following conditions: ­ Movie quality: AVCHD HQ ­ When continuous shooting ends because of set limits (page 24), press the MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate. x Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied). You can import images to a computer without worrying about wearing down the battery pack by connecting the camera to a computer using the multi-use terminal USB cable. Notes · Power cannot be supplied when the battery pack is not inserted in the camera. · Power supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. · If you connect the camera and a computer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed from the playback screen to the USB connection screen. Press (Playback) button to switch to the playback screen. GB 15 Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. the memory 2 Insertthe notched cornercard (sold separately). memory card · With facing as illustrated, insert the until it clicks into place. cover securely, 3 Close thelock is hidden. so that the yellow mark under the slide · Closing the cover with the battery inserted incorrectly may damage the camera. x Memory cards that you can use Memory card Memory Stick PRO Duo A Memory Stick PRO-HG Duo Memory Stick Duo SD memory card B SDHC memory card SDXC memory card For still images a a a a a a For movies a (Mark2 only) a -- a (Class 4 or faster) a (Class 4 or faster) a (Class 4 or faster) · In this manual, products in A are collectively referred to as "Memory Stick Duo" media, and products in B are collectively referred to as SD card. GB 16 x To remove the memory card/battery pack Memory card: Push the memory card in once. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note · Never remove the memory card/battery pack when the access lamp (page 11) is lit. This may cause damage to data in the memory card/internal memory. Setting the clock ON/OFF (Power) Lens cover 1 Lower theislens cover. power lamp lights up only when the camera The camera turned on. [. . . ] In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies. GB 26 On charging the battery If you charge a battery that has not been used for a long time, you may be unable to charge it to the proper capacity. This is due to the battery characteristics, and is not a malfunction. Charge the battery again. Warning on copyright Television programs, films, videotapes, and other materials may be copyrighted. [. . . ]