User manual SONY CYBER-SHOT DSC-TX100

[. . . ] The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. To reduce fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] X Battery life and number of still images you can record and view battery life Shooting (still images) Viewing (still images) Shooting (movies) Notes · The above number of still images applies when the battery pack is fully charged. The number of still images may decrease depending on the conditions of use. The number of still images that can be recorded is for shooting under the following conditions: ­ Using Sony "Memory Stick PRO Duo" (Mark2) media (sold separately) ­ The battery pack is used at an ambient temperature of 25°C (77°F). [GPS setting]: [Off] (DSC-TX100V only) · The number for "Shooting (still images)" is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) ­ [Panel Brightness] is set to [3]. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. The battery life for movies applies shooting under the following conditions: ­ Movie quality: AVCHD HQ ­ When continuous shooting ends because of set limits (page 22), touch (Movie button) again and continue shooting. Shooting functions such as the zoom do not operate. The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied). You can import images to a computer without worrying about wearing down the battery pack by connecting the camera to a computer using the multi-use terminal USB cable. notes · Power cannot be supplied when the battery pack is not inserted in the camera. Power supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. If you connect the camera and a computer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed from the playback screen to the USB connection screen. X Memory cards that you can use Memory card Memory Stick PRO Duo A Memory Stick PRO-HG Duo Memory Stick Duo SD memory card B SDHC memory card SDXC memory card For still images a a a a a a For movies a (Mark2 only) a -- a (Class 4 or faster) a (Class 4 or faster) a (Class 4 or faster) In this manual, products in A are collectively referred to as "Memory Stick Duo" media, and products in B are collectively referred to as SD card. X To remove the memory card/battery pack Memory card: Push the memory card in once. Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory. Power lamp lights up only when the camera The camera turned on. Set to automatically release the shutter when a smile is detected. Set to automatically shoot two images and select image in which the eyes are not blinking. Search the camera's functions according to your needs. [. . . ] In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies. If you charge a battery that has not been used for a long time, you may be unable to charge it to the proper capacity. This is due to the battery characteristics, and is not a malfunction. [. . . ]