User manual SONY CYBER-SHOT DSC-TX100V/R

[. . . ] *2 ID3 tag is an MP3 file that contains information about album name, artist name, track name, etc. This label is located on the bottom of the chassis. * Functions available with optional CD/MD unit Using the rotary commander . changing the sound and display settings . [. . . ] To return to normal play mode, select "REPOFF. During playback, press (4) (SHUF) repeatedly until the desired setting appears in the display. To return to normal play mode, select "SHUFOFF. " Note "SHUF-ALL" will not shuffle tracks between CD units and MD units. You can label each disc with a custom name (Disc Memo). You can enter up to 8 characters for a disc. If you label a CD, you can locate the disc by name (page 15). As a display item, the Disc Memo always takes priority over any original CD TEXT information. Start playing the disc you want to label in a CD unit with the CUSTOM FILE function. Turn the VOL control dial to select the disc name you want to erase. Repeat steps 5 and 6 if you want to erase other names. Turn the SEEK/AMS control dial while the station name is flashing (within 8 seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI SEEK" appears). If the unit cannot find the same PI, the unit returns to the previously selected frequency. When AF function is on: this unit's factory-set setting restricts reception to a specific region, so you won't be switched to another regional station with a stronger frequency. If you leave this regional programme's reception area or would like to take advantage of the whole AF function, press (AF) for 2 seconds until "REG-OFF" appears. Note This function does not work in the United Kingdom and in some other areas. These settings function regardless of the current FM programme/source, CD; the unit switches back to the original source when the bulletin is over. The unit will continue searching for stations available with TP if "NO TP" is indicated. This function enables you to select other local stations in the area, even if they are not stored on your number buttons. Within 5 seconds, press the number button of the local station again. Repeat this procedure until the desired local station is received. [. . . ] The unit is installed at an angle of more than 60°. The unit is not installed in a sturdy part of the car. Cannot turn off the "--------" indication. Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's aerial booster. [. . . ]