User manual SONY CYBER-SHOT DSC-TX9/H

[. . . ] If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. Observe the following cautions, as there may be a risk of heat generation, fire or explosion. Do not place the product in or near fire, or put the product in a microwave. do not leave the product in a car in hot weather. [. . . ] A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. For details on advanced operations, please read "Cyber-shot User Guide" (HTML) on the CD-ROM (supplied) using a computer. For Macintosh users: 1 Select the [User Guide] and copy [eng] folder stored in the [User Guide] folder to your computer. The battery pack is built into this camera. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. R RESET button S Lock release lever for USB arm T (USB) arm U USB arm cover The battery pack is built into the camera. Charge the camera before using for the first time. The camera may not work in shooting mode because of the voltage reduction the AC adaptor. X Battery life and number of still images you can record/view The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. ­ The built-in battery pack is used at an ambient temperature of 25°C (77°F). Power can be supplied from the computer even when the camera is turned on. When importing images to your computer, you can perform the operation without having to worry about running out of the battery charge. note · When changing the settings of the camera, the power is not supplied even though the dedicated USB connection support cable (supplied) is connected. Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time. It may take time for the power to turn on and allow operation. 3 Select the desired area, following the instructions on the screen, then press z t [OK]. [. . . ] Select a folder containing the images you want to play back. If you press the MENU button while shooting or during playback, (Settings) is provided as a final selection. Number of still images and recordable time of movies The number of still images and recordable time may vary depending on the shooting conditions. These are the total times for all movie files. [. . . ]