User manual SONY CYBERSHOT DSC-W510

[. . . ] Keep the battery pack out of the reach of small children. Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. [. . . ] If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. For details on advanced operations, please read "Cyber-shot User Guide" (HTML) on the CD-ROM (supplied) using a computer. For Macintosh users: 1 Select the [User Guide] and copy [eng] folder stored in the [User Guide] folder to your computer. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. Battery/memory card cover Battery eject lever Battery insertion slot (USB) / A/V OUT jack Terminal cover The battery pack into the 1 Insertcan charge the battery even when itbattery charger. If you continue charging the battery pack for about one more hour after the CHARGE lamp turns off, the charge will last slightly longer (full charge). The above charging times apply when charging a fully depleted battery pack at a temperature of 25 °C (77 °F). Charging may take longer depending on conditions of use and circumstances. When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger. Be sure to use the battery pack or the battery charger of the genuine Sony brand. X Battery life and number of still images you can record/view The number of still images that can be recorded is based on the CIPA standard, and is for shooting under the following conditions. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. ­ A fully charged battery pack (supplied) is used at an ambient temperature of 25 °C (77 °F). Then, insert the battery pack until the battery eject lever locks into place. X Memory cards that you can use Memory Card Memory Stick PRO Duo A Memory Stick PRO-HG Duo Memory Stick Duo B SD memory card SDHC memory card For still images a a a a a For movies a a -- a a In this manual, products in A are collectively referred to as "Memory Stick Duo" media. In this manual, products in B are collectively referred to as SD card. When recording movies, it is recommended that you use Class 2 or faster SD cards. X To remove the memory card/battery pack Memory card: Push the memory card in once. Never remove the memory card/battery pack when the access lamp (page 8) is lit. [. . . ] Otherwise, the camera may not properly record or play back images. In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. Voor Macintosh-gebruikers: 1 Selecteer de [Gebruikershandleiding] en kopieer de map [nl] die is opgeslagen in de map [Gebruikershandleiding] naar uw computer. [. . . ]