User manual SONY CYBER-SHOT DSC-W510/S

[. . . ] Microsoft®, Windows®, and Windows NT® are U. S. registered trademarks of Microsoft Corporation. registered trademark of Intel Corporation. Materials disposal This SONY product contains the following materials that might require special handling at end-of-life: Mercury in the fluorescent lamp in the liquid crystal display Lead in solder Alkaline manganese dioxide-zinc or lithium-iron disulfide AA batteries that are included with the camera Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) (www. eiae. org). ii SONY photosmart 715 user guide Contents Chapter 1: Getting started Camera parts . [. . . ] 8 Start the SONY Automatic Image Unload software and complete the steps to unload. 34 SONY photosmart 715 user guide Using the camera with a Macintosh computer You can transfer the images in your digital camera to a Macintosh computer. System requirements for a Macintosh computer To work with your camera, your Macintosh computer must meet or exceed the following requirements. For updated system requirements, go to www. hp. com/photosmart. Operating system Processor Memory (RAM) Free hard disk space Video display CD-ROM Interface Macintosh OS 8. 6 or later Power PC, 233 MHz OS 8. 6 or OS 9: 64 MB OS X: 128 MB 150 MB 800 by 600 pixels, 16-bit color Any speed USB port Changing the USB protocol setting Before you can unload images from the camera to a Macintosh computer, you must change the USB protocol setting to MSDC in the Setup menu on the camera's image display. To change the USB protocol setting 1 Press the button to turn on the image display. 2 Press the button again to open the main menu, use the down side of the controller to select the Setup menu, and then press OK. 3 Use the up or down side of the controller to scroll to USB. Sharing and printing images 35 4 Use the right or left side of the and then press OK. controller to select MSDC, Installing the software on the Mac OS You can unload images to your computer either manually or automatically. To use the software's automatic unload feature, install the ArcSoft PhotoImpression with Automatic Image Unload software from the camera CD-ROM. 1 Insert the SONY photosmart 715 CD-ROM into your computer's CD-ROM drive. 2 Double-click the CD icon on the desktop. 3 Double-click the appropriate language folder, and then doubleclick the installer icon. 4 Follow the instructions on the screen to install the software. Certain versions of the camera are shipped with bonus software. Keep the SONY photosmart 715 CD-ROM in the computer's CD-ROM drive and continue to the next section to install the bonus software. To install the bonus software 1 Double-click the Bonus folder icon. Make sure you know where your images are stored on your computer's hard disk. By default, images are stored in the Photo Impressions folder, for example "Macintosh HD:ArcSoft PI:Photos:2002. 07. 04. " If you ever decide to delete the ArcSoft PI folder, you must first move your images to another folder. If you do not, your images will be deleted from the hard disk when you delete the PhotoImpression folder. You can unload images manually without using the ArcSoft software. When you connect the camera to your computer, an "Untitled drive" icon representing the camera appears on the desktop. Double-click the drive icon to gain access to your images. Then, drag and drop the selected files to your hard drive. Unloading images without using the camera software If you are away from home, you can unload images to a computer that does not have the Automatic Image Unload software installed on it. Note Make sure that the computer has a USB port and that its operating system is Windows 2000 or Windows Me or later, or Mac OS 8. 6 or later. Sharing and printing images 39 To unload images to a Windows or Macintosh computer 1 Change the camera's USB Protocol setting to MSDC so that the camera will look like a disk drive to the computer. For more information, see "Changing the USB protocol setting" on page 35. 2 Connect the camera to the Windows or Macintosh computer with the USB cable. The letters PC appear in the status LCD to indicate that the camera is connected to the computer. [. . . ] Some countries, states or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion might not apply to you. This warranty gives you specific legal rights and you might also have other rights that vary from country to country, state to state, or province to province. SONY's limited warranty is valid in any country or locality where SONY has a support presence for this product and where SONY has marketed this product. The level of warranty service you receive may vary according to local standards. [. . . ]