User manual SONY DSC-WX1 annexe 4

[. . . ] If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it. Do not short circuit and do not allow metal objects to come into contact with the battery terminals. [. . . ] ZShooting two images with different settings and selecting the one you like Press the MENU button, then select (Scene Recognition) t (Advanced) with v/V/b/B on the control button. When the camera recognizes a difficult-to-shoot scene ( (Twilight), (Twilight Portrait), (Twilight using a tripod), (Backlight), (Backlight Portrait)), it changes the settings as follows and shoots two images with different effects. The image size determines the size of the image file that is recorded when you take a image. The larger the image size, the more detail will be reproduced when the image is printed on large-format paper. The smaller the image size, the more images can be recorded. Select the image size that matches the way you will view your images. Image size (3648×2736) Usage guidelines For prints up to A3+ size No. When you print images shot with 16:9 aspect ratio, both edges may be cut off. Capacity Internal memory Size 10M 5M 3M VGA 3:2(8M) 16:9(7M) 16:9(2M) "Memory Stick Duo" media formatted with this camera 1 GB 202 293 617 5924 200 201 987 2 GB 412 595 1253 12030 406 409 2005 4 GB 812 1174 2472 23730 801 807 3955 8 GB 1640 2372 4991 47910 1618 1629 7986 16 GB 3335 4821 10140 97390 3290 3312 16230 The number of still images may vary depending on the shooting conditions and the recording When the number of remaining shootable images is greater than 9, 999, the ">9999" indicator When an image shot with other cameras is played back on this camera, the image may not appear Using the Shooting mode that matches the scene (Scene Selection) If you want to switch to another scene, press the MENU button. (High Sensitivity): Shoots images without a flash even in low lighting. (Twilight): Shoots night scenes without losing the nighttime atmosphere. 2 Make a USB connection between the camera and your computer. Allows you to select the display format for viewing multiple images when using "Memory Stick Duo" media. When you cannot play back images recorded with other cameras, view the images in [Folder According to the View Mode, this item will MENU button be [All in This Folder] or [All in Event]. This Image: You can delete the currently displayed image. Select (Settings) with V on the control button, then press z. Select ("Memory Stick" Tool) or (Internal Memory Tool) with v/V/b/B on the control button, then press [Format] t z. You can view images recorded on the camera by connecting the camera to an HD (High The [Video Out] setting is set to [NTSC] mode at the factory to let you enjoy optimum movie When images do not appear or jittery on your TV, you may be using a PAL-only TV. If you have a PictBridge compliant printer, you can print images by the following procedure. First, set the camera to enable USB connection between the camera and the printer. After the connection is made, the indicator appears. You cannot print images stored in the internal memory at a print shop directly from the camera. [. . . ] Shooting in extremely cold or hot places that exceed this range is not recommended. In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction. Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction. In a location subject to rocking vibration Near strong magnetic place In sandy or dusty places Be careful not to let sand or dust get into the camera. [. . . ]