User manual SONY CYBER-SHOT DSC-WX10/B

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. TRADEMARK INFORMATION Microsoft® and Windows® are U. S. [. . . ] Do not leave this camera in a location subject to extremely high temperatures, such as in a sealed vehicle or in direct sunlight. Exposure to high temperatures may adversely affect the camera case and internal components and may cause a fire. Do not cover or wrap the camera with a cloth or quilt. This may cause heat to build up and distort the camera case and cause a fire. Always use the camera and accessories in well-ventilated locations. Handle the camera carefully and do not expose the camera to shock or vibration. Handling the camera roughly may cause a malfunction. Do not use batteries other than those specified for use with your camera. Use of unsuitable batteries may result in the batteries splitting, or leaking and may cause a fire, injury, or soiling of the battery compartment. When placing the batteries into the camera, check the polarity markings on the batteries ( - and + ) to ensure that the batteries are inserted correctly. Incorrect battery polarity will result in camera inoperability and may result in the batteries splitting or leaking and causing a fire, injury, or soiling of the battery compartment. button. · Every time when you power on the camera, it will return to its default setting as follows: Mode: Record Mode (Still) Resolution:1280 x 1024 Quality : Fine Auto Power Off The camera is equipped with an automatic power off function. If there is no camera activity (no buttons are pressed) for 180 seconds while the camera is powered on, the camera will eventually turn itself off to conserve power. If the camera has powered-off, you must turn the camera on again by pressing (short key) the button. Camera Operations Taking Pictures The camera is equipped with an optical viewfinder to compose pictures. 1. Turn the camera on by pressing (short key) the button. 2. Toggle (short key) the button to select Record Mode. 3. Compose the picture by using the viewfinder. Press and hold the shutter button for 1~2 seconds until you hear the 2nd beep sound (before releasing the shutter button), otherwise the captured image will become blurred. NOTE · Since this camera does not have built-in flash, please do not record images with high contrast (backlighting), deep shadow and dark places. · Memory full is indicated by displays on status LCD, with 5 consecutive beeps. English | 13 User'sManual (Still). 14 | English Using the Self-timer The self-timer duration is 10 seconds. After the activation of the self-timer by pressing the shutter button, the self-timer LED starts blinking slowly for 6 seconds, and then blinking faster for the next 4 seconds. The self-timer LED will light on indicates that an image has been captured. [. . . ] Follow the on-screen instructions to complete the installation. Restart your computer. Step 2: Connecting the Camera to Your Computer 1. Turn the camera on by pressing (short key) the button. Connect one end of the USB cable to an available USB port on your computer. [. . . ]