User manual SONY CYBER-SHOT DSC-WX30

[. . . ] The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. To reduce fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] The number for "Shooting (still images)" is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) ­ [Panel Brightness] is set to [3]. ­ The flash strobes once every two times. ­ The power turns on and off once every ten times. ⷠThe battery life for movies applies shooting under the following conditions: GB ­ Movie quality: AVC HD HQ ­ When continuous shooting ends because of set limits (page 20), touch (Movie button) again and continue shooting. Shooting functions such as the zoom do not operate. The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied). You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the multi-use terminal USB cable. notes · Power cannot be supplied when the battery pack is not inserted in the camera. ⷠPower supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. ⷠIf you connect the camera and a computer using the multi-use terminal USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. X Memory cards that can be used Memory card Memory Stick PRO Duo A Memory Stick PRO-HG Duo Memory Stick Duo SD memory card B SDHC memory card SDXC memory card For still images a a a a a a For movies a (Mark2 only) a -- a (Class 4 or faster) a (Class 4 or faster) a (Class 4 or faster) In this manual, products in A are collectively referred to as "Memory Stick Duo" media, and products in B are collectively referred to as SD card. X To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Never remove the memory card/battery pack when the access lamp (page 7) is lit. This may cause damage to data in the memory card/internal memory. On the camera for the first Date & setting is displayed when you turn It may take time for the power to turn on and allow operation. Location by following the 3 Select a desired geographic touch [Next]. Instructions on the screen, then 7 When an [In-Camera Guide] introductory message is appeared on the screen, touch [OK]. 2 Press the shutter button fully down to shoot an image. The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. ⷠContinuous shooting is possible for approximately 29 minutes at one time at the camera's default settings and when the temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by touching (Movie button) again. [. . . ] This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera. The camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the screen. [. . . ]