User manual SONY CYBER-SHOT DSC-WX9/B

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Turn the mode dial to the mode or the mode. Press the shutter button down halfway (the camera adjusts the exposure and the focus), then press it the rest of the way down. When the camera adjusts the exposure and focus, the LED indicator lights red. Take a picture until the LED indicator lights green. The LED indicator blinks orange while the camera is processing a captured image. 25 Using the LCD monitor 1. Turn the camera on by sliding the switch. Turn the mode dial to the mode or the mode. Turn the LCD monitor on by pressing the ENTER button. Press the shutter button down halfway (the camera adjusts the exposure and the focus), then press it the rest of the way down. When the camera adjusts the exposure and focus, the LED indicator lights red. Take a picture until the LED indicator lights green. When you play back the image recorded with digital zoom, the image size is 1024x768 pixels. · The maximum zoom magnification is 2X for recording and 4X for viewing an image. · Digital zoom cannot be used in the movie mode. 29 Using the self-timer The self-timer duration is 10 seconds. After the activation of the self-timer by pressing the shutter button, the self-timer lamp starts blinking slowly for 7 seconds and then blinking faster for the rest of 3 seconds. With this design, you can get in the frame when taking group pictures. E Secure the camera to a tripod or place it on a stable surface. Turn the camera on by sliding the switch. Set the mode dial to the mode or the mode. icon appears on the LCD monitor and status LCD. Press the shutter button down halfway, then press it the rest of the way down. After the self-timer indicator blinks for 10 seconds, the camera takes a picture automatically. To cancel self-timer photography at any time, press the button again or press the shutter button. 1. [. . . ] Press the shutter button to toggle the DPOF print tag setting for the specified image. NOTE E · When using the shutter button to enable the DPOF setting, the default setting is size=standard, and quantity=1. EXIT This option exits the playback menu and then returns to the You can also press the button again to exit. Press the ENTER button to exit. 58 Movie menu To change movie menu setting, press the set by using the / button. button in the mode and move to the option you want to LCD BRIGHTNESS This option adjusts the brightness of the LCD monitor. Refer to LCD BRIGHTNESS in Record menu for detailed information. E EXIT This option exits the movie menu and then returns to the mode. [. . . ]