User manual SONY CYBER-SHOT DSC-WX9/BBDL

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. EN-1 TRADEMARK INFORMATION Microsoft® and Windows® are U. S. [. . . ] The zoom bar and magnifier icon appear on the LCD monitor. Press the button to reduce the magnification level. Press the OK button to cancel the digital zoom function. Press the shutter button to capture a "zoomed" image. Note: The more the image is enlarged, the more pixilated (grainier) the image. EN-20 Self-Timer The self-timer duration is ten seconds. Activate the self-timer by pressing the shutter button. The self-timer LED blinks slowly for seven seconds and then blinks rapidly for the last three seconds. This allows you to get into the scene when capturing group images. Secure the camera to a tripod or place it on a stable surface. After ten seconds, the camera takes an image. To cancel the self-timer at any time, press the shutter button to disrupt the sequence. Note: After an image is taken using self-timer, the self-timer mode is turned off. This magnification allows you to view fine details. Power on the camera, and toggle the button to the mode. Select the image that you want to view using the / button. Enlarge the image by pressing the ZOOM button (the OK button). Pressing the ZOOM button once magnifies the image to 2X. Pressing it again magnifies the image to 3X 4X. To view the different portion of the enlarged image, press the / / / button. To return to the regular display (cancel playback zoom) from 4X-enlarged status, press the ZOOM button again. EN-25 Displaying Thumbnail Images This function allows you to view as many as nine thumbnail images on the LCD monitor simultaneously so you may search for a particular image. Power on the camera, and toggle the button to the mode. Toggle the button until the thumbnail screen appears. Nine thumbnail images appear on the LCD monitor (assuming there are nine or more images in memory). [. . . ] And for more information about Setup Menu, refer to the Setup menu section. EN-44 Playback Menu Use the playback menu to create an on-camera slide show or transfer images from internal memory to a memory card. You can also use the Playback menu to delete one or all images. To access the playback menu, press the button in the mode and navigate through the options by using the / button. SETUP MENU Press the OK button to access the Setup Menu. For more information about Setup Menu, refer to the Setup menu section. SLIDE SHOW Refer to section in this manual titled "Slideshow Display" in the PLAYBACK MODE for further details. ERASE Refer to section in this manual titled "Deleting Images" in the PLAYBACK MODE for further details. COPY TO CARD This feature allows you to copy your images from the camera's internal memory to a memory card. [. . . ]