User manual SONY CYBER-SHOT DSC-WX9/R

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Compose your scene and press the shutter button. To cancel macro photography at any time, press the Note: There is not a distinct point (subject range) at which normal mode is favored over macro mode; capture an image in both optical and macro modes and compare the results. button again. Using the Self-Timer This feature allows you to get into the scene when tcapturng group images. Secure the camera to a tripod or place it on a stable surface. Turn the camera on and set the mode to or by toggling the 3. Toggle the button to select the desired self-timer mode. Compose your scene and press the shutter button. The photography is then captured after the preset time. To cancel the self-timer at any time, press the button to disrupt the sequence. Note: After one shot is captured, the self-timer mode is turned off. If you wish to capture another image using the self-timer, repeat these steps. 25 Using the Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a desired flash mode to suit your circumstances. Compose your scene and press the shutter button. F G Note: In this mode, the ISO speed cannot be set. In this mode, in a dusk or nighttime background, the Flash mode defaults to Red-eye reduction [ ]. S 28 Pan Mode Normally, your camera performs Auto Focus in an attempt to maximize the chance that your images are within focus. When the Pan mode is selected for the shooting mode, the camera's focus distance is preset to 1 meter (3. 3 feet), and images are captured without the AF mechanism, allowing you to instantly catch the moment when you do not want to miss a shot. Since the camera does not re-focus every shot you will realize a faster shot-to-shot time. Turn the camera on by pressing the Toggle the button to the [ ] mode. Select [ ] by using the / button and then press the OK button. Compose your scene and press the shutter button. Note: In this mode, the images are tcaptured with the focus fixed at 1 M. In this mode, the ISO speed cannot be set and the Flash mode defaults to auto [ ]. Night Scene Mode Capturing human subjects by using this mode helps to provide a natural balance between the main subject and the nighttime background. The people in an evening sky or night scene are illuminated with light from the flash while the background is captured at a slower shutter speed to prevent blurring and let both (people and the background) appear properly exposed. Turn the camera on by pressing the button. Select [ ] by using the / button and then press the OK button. [. . . ] Refer to section in this manual titled "Setting Image Resolution and Quality" for further detail. Quality EV E F White balance G S 50 Set the desired quality (compression ratio) sharpness at which the image is to be captured. Refer to section in this manual titled "Setting Image Resolution and Quality" for further detail. Your ViviCam 3760 adjusts the exposure of each scene automatically. However, if the subject is too dark, or too bright, you may override the camera's automatic exposure determination to make the subject brighter or darker. [. . . ]