User manual SONY DSMT1

[. . . ] DIGITAL SATELLITE MODULATOR DSM-T1 OPERATION MANUAL [English] 1st Edition Serial No. 10001 and Higher WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When all the indicators flash, an error message (ERROR-XX) appears. When the ALARM indicator lights up, a warning message (0X WARNING) appears. !TM MENU button Displays the menu in the display window. When you press the MENU button, its back lighting lights up. CH 3/4: Inputs AES/EBU audio signals on channels 3 and 4. !£ VIDEO connector (BNC type) Inputs composite analog video signals from the video output connector on the BVW-75/75P Video Cassette Recorder, etc. !¢ AUDIO connectors (XLR type, 3-pin, female) Input analog audio signals (2 channels) from the audio output connectors on the BVW-75/75P Video Cassette Recorder, etc. CH 1: Inputs analog audio signals on channel 1. CH 2: Inputs analog audio signals on channel 2. AUDIO connectors (XLR type, 5-pin, male) Input analog audio signals (4 channels) from the audio output connectors on the BVW-75/75P Video Cassette Recorder, etc. CH 1/2: Inputs analog audio signals on channel 1 and 2. CH 3/4: Inputs analog audio signals on channel 3 and 4. The 5-pin XLR type can be converted to the 3-pin XLR (2 channels) with the optional CCXA-53 audio cable. The ITT CANNON XLR-3-11-11 conversion adapter can be also used to convert to the 3-pin XLR. 9 Menu Setup A menu is provided to set up the operating conditions of the unit. Menu items include basic items, items about the optional boards, items about the front panel, etc. For more information about menu items, see " Menu List" (page 12). 4 5 To change the parameters of other items, repeat steps 2 and 3. The changed parameters are saved in the current bank. The contents of the current bank are saved even after the power is turned off. To cancel changing parameters Press the MENU button before pressing the ENTER button. A "current bank" and 8 "menu banks" are provided with the unit. The current bank can be used to store current parameters. The menu banks can be used to store up to 8 sets of parameters. Saving/recalling frequently used parameters in/from menu banks allows faster setting up of the unit's operating conditions. 6 Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu. Initial Display Switching the power on causes the selected parameter of "15: IF OUT LEVEL" and "16: CARRIER" on the menu to appear in the display window. To return the contents of the current bank to the factory setting Follow the procedure below. Changing the Parameters Follow the procedure below to change the parameters and save them in the current bank. 1 Press the MENU button. The back lighting for the MENU button lights up, and the menu appears in the display window. 1, 6 INPUT SEL ALOG SDI AUDIO SDI AEB/EBU REF IN1 IN2 VIDEO STD EXT 525 625 FREQ BW 36M 18M FEC RATE 7/8 ENTER 3/4 ALARM MENU ITEM 2, 4 RESET 2 3 Select "93: FACTORY SET" using the ITEM Â or µ button. [. . . ] CH1/CH2: Inputs audio signals on channel 1 and 2. CH3/CH4: Inputs audio signals on channel 3 and 4. ALL CH1-CH4: Inputs audio signals on all channels. (When the FEC RATE is set to 7/8, ALL CH1-CH4 is selected automatically. ) When the BKSM-T103 Analog Input Board is installed and 3-pin XLR connectors are used, CH1/CH2 is selected automatically regardless of the FEC RATE selection. [. . . ]