User manual SONY DSX-A30

[. . . ] 4-408-052-51(1) FM/MW/LW Digital Media Player FM/MW/LW Digital Media Player Operating Instructions GB Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing DE FR IT NL To cancel the demonstration (DEMO) display, see page 5. DSX-A30 Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual. Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. [. . . ] Note The CT function may not work properly even though an RDS station is being received. 12 If a USB device is already connected, to start playback, press  repeatedly until “USB” appears. to stop playback , press and hold  for 1 second. To remove the USB device, stop the USB playback, then remove the USB device. Note Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. * During playback, press (BROWSE) for more than 2 seconds to directly return to the beginning of the category list (USB only). 3 4 2 3 Rotate the control dial to select the desired search category, then press it to confirm. Repeat step 2 until the desired track is selected. Sound Settings and Setup Menu Changing the sound settings Adjusting the sound characteristics 1 2 3 4 During reception/playback, press the select button. Rotate the control dial until the desired menu item appears, then press it. Rotate the control dial to select the setting, then press it. ” AUX VOL*2 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: “+18 dB” – “0 dB” – “–8 dB. ” This setting negates the need to adjust the volume level between sources. Enjoying sophisticated sound functions Selecting the sound quality — EQ3 Preset You can select an equalizer curve from 7 equalizer curves (XPLOD, VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF). The following items can be set: EQ3 PRST (EQ3 PRESET) (page 15) EQ3 LOW* (page 16) 1 EQ3 MID*1 (page 16) EQ3 HIGH*1 (page 16) BALANCE Adjusts the sound balance: “RIGHT-15 (R15)” – “CENTER (0)” – “LEFT-15 (L15). ? 1 2 3 4 During reception/playback , press the select button. Rotate the control dial until “EQ3 PRST” appears, then press it. Rotate the control dial until the desired equalizer curve appears, then press it. 15 To cancel the equalizer curve, select “OFF” in step 3. Tip The equalizer curve setting can be memorized for each source. Rotate the control dial until the desired item appears, then press it. Rotate the control dial to select the setting, then press it*. [. . . ] – See the installation/connections manual of this model to check the connection. eRROR-99  There may be an internal malfunction. – Press  for more than 2 seconds (the display disappears), then press  again. If the error indication remains on in the display, consult your nearest Sony dealer. [. . . ]