User manual SONY DSX A410BT

[. . . ] 4-697-418-33(1) FM/MW/LW Digital Media Player ЦИФРОВОЙ РЕСИВЕР Operating Instructions Bedienungsanleitung Mode d’emploi Istruzioni per l’uso GB DE FR IT Manual de instrucciones ES Инструкция по эксплуатации RU To cancel the demonstration (DEMO) display, see page 19. For the connection/installation, see page 31. DSX-A410BT For safety, be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use. For details, see “Connection/Installation” (page 31). [. . . ] STEERING Registers/resets the setting of the steering wheel remote control. (Available when connected with the connection cable (not supplied). ) (Available only while the source is off and the clock is displayed. ) STR CONTROL (steering control) Selects the input mode of the connected remote control. To prevent a malfunction, be sure to match the input mode with the connected remote control before use. ) BEEP Activates the beep sound: [ON] , [OFF]. ) Canceling the DEMO Mode You can cancel the demonstration display which appears when the source is off and the clock is displayed. 1 2 3 4 Press MENU, rotate the control dial to select [GENERAL], then press it. Rotate the control dial to select [SET DEMO], then press it. Rotate the control dial to select [SET DEMO-OFF], then press it. Basic Setting Operation You can set items in the following setup categories: General setup (GENERAL), Sound setup (SOUND), Display setup (DISPLAY), BLUETOOTH Setup (BLUETOOTH), Sony | Music Center Setup (SONY APP) 1 2 Press MENU. Rotate the control dial to select the setup category, then press it. The items that can be set differ depending on the source and settings. 3 Rotate the control dial to select the options, then press it. To return to the previous display Press 19GB EDIT CUSTOM Registers the functions (SOURCE, ATT, VOL +/–, SEEK +/–, VOICE, ON HOOK, OFF HOOK) to the steering wheel remote control:  Rotate the control dial to select the function you want to assign to the steering wheel remote control, then press it. ΍ While [REGISTER] is blinking, press and hold the button on the steering wheel remote control you want to assign the function to. When registration is complete, [REGISTERED] is displayed. ΍ To register other functions, repeat steps  and . (Available only when [STR CONTROL] is set to [CUSTOM]. ) RESET CUSTOM Resets the setting of the steering wheel remote control: [YES], [NO]. (Available only when [STR CONTROL] is set to [CUSTOM]. ) Notes  While making settings, only button operation on the unit is available. [. . . ] Speaker connection  Before connecting the speakers, turn the unit off. Ώ Use speakers with an impedance of 4 Ω to 8 Ω, and with adequate power handling capacities to avoid damage. ΍ To the car’s power connector 12 continuous power supply Yellow 13 15 16 power antenna (aerial) / power amplifier control Blue/white striped (REM OUT) switched power supply ground (earth) Red Black 33GB Power connection diagram Make sure your car’s auxiliary power connector, and match the connections of cords correctly depending on the car. Auxiliary power connector After matching the connections and switching power supply leads correctly, connect the unit to the car’s power supply. [. . . ]