User manual SONY DSX-S300BTX

[. . . ] Be sure to install this unit in the dashboard of the car for safety. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0. [. . . ] tips · With Bluetooth signal on: when the ignition is switched to on, this unit reconnects automatically to the last-connected cellular phone. but automatic connection also depends on the cellular phone's specification. If this unit does not reconnect automatically, connect manually. You can also select the Bluetooth Phone source by pressing and holding (BROWSE) on this unit for 2 or more seconds, or pressing (CALL) on the card remote commander. Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. You need to make sure the appropriate phonebook has been selected. 3 Rotate the multi way encoder to select an initial from the initial list, then press it. 4 Rotate the multi way encoder to select a name from the name list, then press it. 5 Rotate the multi way encoder to select a number from the number list, then press it. Calling from the call history 3 Rotate the multi way encoder to select a name and phone number from the call history, then press it. Note You can call from the call history (up to 20). When receiving a call, a ringtone is output from your car speakers. Press the multi way encoder when a call is received with a ringtone. Only the phone number may appear, depending on the cellular phone. The built-in microphone of this unit is located on the rear of the front panel (page 15). Do not cover the microphone with tape, etc. Calling by direct phone number input You can call by direct phone number input using only the card remote commander. 1 Press (CALL) on the card remote commander to select the Bluetooth Phone source. 2 Press the number buttons (0-9, or ) on the card remote commander to enter the phone number. You can select an auto answer setting from "off, " "Short" or "Long" (page 42). You can switch the ringtone from "Default" or "Cellular" (page 42). * Depending on the cellular phone, this unit's ringtone may be output even if set to "Cellular. [. . . ] T Connect a USB device with a music file in it. The connected USB device does not contain data for the SensMeTM function, or the data has been moved to an improper location in the USB device. Not Found There is no item beginning with the desired letter in Alphabet search. Not Supported The connected USB device is not supported. [. . . ]