User manual SONY DVO1000MD

[. . . ] 3-855-576-11 (1) DVD Recorder Instructions For Use DVO-1000MD © 2005 Sony Corporation Owner's Record The model and serial numbers are located at the rear. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ____________________ WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] The TOP menu appears. 4 Press the b button. The PRE REC sub menu appears. 2 Select "SETUP MENU" by pressing the V or v button and press the b button with "SETUP MENU" highlighted. Recording 31 The SETUP MENU appears. The message "NOW SAVING. . . " appears and the unit starts to save the setting. When the saving is completed, the message disappears and the unit returns to the normal display. The setting is executed. Recording 3 Select "DISC END" by pressing the V or v button. 4 Press the b button. The DISC END sub menu appears. 5 Select the desired disc end mode by pressing the V or v button. Mode GOTO TOP END STOP Setting To return to the beginning of the disc. To return to the beginning of the last title, and end recording automatically. However, the disc is not ejected, and the disc remains in the tray. To stop recording and eject the disc automatically. (Factory setting) EJECT 6 Press the SET button. 32 Recording The FINALIZE display appears. Finalizing a Disc There is a case where a disc recorded on this unit must be finalized to play it on other equipment compatible with DVD+RW equipment. Proceed as follows to finalize the disc. Even if the disc is finalized, you can use that disc for recording again or you can edit data recorded on the disc. Recording 1 2 Load the disc to be finalized into the unit. The TOP menu appears. 5 Select "EXEC" pressing the V or v button. The message "READY?" appears. 6 Press the SET button. PLEASE WAIT. " appears, and finalization is started. When finalization is completed, the message changes to "COMPLETE!, " and the unit exits the menu and returns to the normal display. 3 Select "DISC INFO" by pressing the V or v button, and press the b button with "DISC INFO" highlighted. The DISC INFORMATION sub menu appears. 7 Remove the disc. 4 Press the V or v button to select "FINALIZE" and press the b button with "FINALIZE" highlighted. Finalizing a Disc 33 The FORMAT display appears. Formatting a Disc You can erase all the data recorded on the DVD+RW disc and format that disc so as to be able to use it with the unit. Note When a recorded disc is formatted, all the data, such as title names is erased. You cannot resume it to the status before formatted. Recording 1 2 Load the disc to be formatted in the unit. The TOP menu appears. 5 Select "EXEC" by pressing the V or v button, and then press the SET button. To quit formatting a disc Select "ESC, " and then press the SET button with ESC highlighted. Or press the MENU button. 6 Press the SET button. PLEASE WAIT. " appears and formatting is started. When formatting is completed, the message changes to "COMPLETE!, " and the unit exits the menu and returns to the normal display. 3 Select "DISC INFO" by pressing the V or v button, and press the b button with "DISC INFO" highlighted. [. . . ] For audio signals, kbps (kilo bits per second) is used. The larger this value, the larger the amount of information involved. However, this value does not relate to the picture and sound quality. Chapter A segment of an image divided by two indexes. [. . . ]