User manual SONY DVP-FX921

[. . . ] Invisible laser radiation when the cabinet is opened or the interlocks are defeated. Use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure! 3 Region Management Information ­ This Player is designed to respond to the Region Management Information recorded on DVDs, The region number of this player is "1". If the region number described on the DVD does not correspond to the region number of this player, this player cannot play this disc. This Player will play DVDs made for "ALL" regions. [. . . ] This will create a Loop and the unit will play the movie continuously from point (A) to point (B) until the A/B button is pressed again. ANGLE BUTTON: Some DVD discs have images with different screen angles, you may select among them, For example, when you watch a running train, you may select to watch it from the front, the right window or the left window without stopping it. This only works when there is an angle mark on the DVD and select "ON" status for angle mark in the GENERAL SET UP. TITLE BUTTON: Pressing the TITLE button will bring up the DVD's title screen. The majority of DVD's will allow a title selection and usually will permit selection at the next level down as well (e. g. , chapters). Some DVD's also permit you to select language and sound preferences in this screen. Once in the TITLE screen, use the scroll buttons to choose your preferences, and then press ENTER to confirm choices and close out the screen. AUDIO BUTTON: Allows the user to select DVD output language. P/N BUTTON: This button is used to select the video format for the DVD Player. The user can choose from NTSC, PAL, or MULTI. POWER ON/OFF BUTTON: Press this button to turn the DVD Player on. Connect the other end of the supplied Audio Cable (Red and White) to the Red and White Jacks of the selected Amplifier. Adjust the sound volume using the amplifier volume control. Amplifier Connection 22 7. REMOTE CONTROL OPERATION C A B Amplifier Connection Refer to the illustration above for the following battery replacement steps: 1. Open the battery compartment (A) and remove the old battery 2. Insert one new button battery (CR 2025) into the battery compartment making sure that the "+" mark faces up (towards the backside of the Remote Control) 3. Slide the battery compartment to the closed position (C). Point the Remote Control towards the Remote Sensor on the DVP-FX921. NOTE: · The Remote Control is designed to operate in the range of 7 meters and 60 degrees from the front of the Remote Sensor. To ensure optimal operation of the Remote Control make sure that there are no barriers between the DVP-FX921 and the Remote Control. · · · Generally, the Battery can last for about 6 months. The Battery should be changed if the Remote Control does not work. [. . . ] SHUFFLE: Plays the songs in random order (from within the selected folder) PROG-END (Program End): Plays the songs on the disc in the order you have programmed (you must create a playlist to set the order you want the tracks on the disc to play). When you are creating a playlist, this option changes to PROGRAM. Program Play To use the program play option, you must create a playlist of songs in the order you want them to play. NOTE: Once you begin adding songs from a folder to create your play list, you cannot add songs from a different folder. [. . . ]