User manual SONY DVP-FX96

[. . . ] 4, 631, 603; 4, 577, 216; 4, 819, 098 and 4, 907, 093 licensed for limited viewing uses only. 2 Content A. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The options below appear on screen display in sequence to show you what information is available using this function. Single Elapsed When Playing Audio CDs Single Elapsed Single Remain Total Elapsed Display Off Total Remain CD Display Mode Single Elapsed: The current track playing and the elapsed time of that track will be displayed on the screen. Single Remain: The current track playing and the amount of time remaining. 13 Total Elapsed: The current track playing and the total time that the CD has been playing. Total Remain: The current track playing and the amount of time remaining on the CD. Display Off: The CD time Information will not be displayed. USING THE1/ALL REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: · Track- repeats the track that is playing. · All- repeats the disc that is playing. · Repeat Off As you toggle through the options, the repeat option changes. The selected repeat option loops repeatedly until you turn it off. Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system. 3) Connect the USB cable (not supplied) from a camera into the USB port on the left side of the unit. 18 N. General Setup Page 1)With no disc inside the player, press `SETUP' to display the Main screen of the Setup Menu on the screen and "General Setup Page" appears. Press `SETUP' again to exit the the same time, " Setup Menu. 2)Press the ENTER button, "TV Display" is highlighted. 3) Press the or buttons to select the other menus in general setup page. 4) Press 5) Press the or button to select the desired option in the sub menu and press the ENTER to confirm your selection. Note: Press a) TV Display * Normal/PS: When the player outputs signal to a normal TV, a normal picture is shown on the full screen. * Normal/LB: When the player outputs signal to a normal TV, a normal picture is shown on the screen with a black strip at both the top and bottom of the screen. * Wide: When the player outputs signal to a wide screen TV, a wide picture is shown on the full screen. b) Screen Saver *On: Enables screen saver *NOTE: The DVD player will enter the Screen Saver mode after approximately three minutes if the same image remains on the screen. *Off: Disables screen saver (off) c) Last Memory *On: The unit will return to the last position on the disc. *Off: The unit will not return to the last position on the disc. [. . . ] The disc's software doesn't support the feature (e. g. , angles) 3. The feature is not available at the moment. You've requested a title or chapter number that is out of range. Can't advance through a movie ) The icon ( appears on screen Picture is distorted · The disc might be damaged. · It is normal for some distortion to appear during forward or reverse scan. [. . . ]