User manual SONY DVP-M35

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains cord must only be changed at qualified service shop. The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD Player is harmful to eyes, do not attempt disassemble the cabinet. [. . . ] As long as you do not open the disc tray, Resume Play is available even if you turn the power off. You can make the picture clearer by reducing the picture noise. Depending on the disc, the effect may be difficult to tell. If the afterimages appear on the TV screen, set the noise reduction function to off on your TV. The player starts playback from the point you stopped the disc in Step 1. To play from the beginning of the disc When "RESUME" appears on the front panel display before you start playing, press p to turn off "RESUME, " then press · You may not do Resume Play depending on the DVD. Depending on where you stopped the disc, the player may resume playback from a different point. The point where you stopped playing is cleared when: ­ you open or close the disc tray ­ you disconnect the AC power cord ­ you change the play mode ­ you start playback after selecting a title, chapter or track ­ you change the settings of "DVD MENU", "AUDIO" or "SUBTITLE" in "LANGUAGE SETUP" in the setup display ­ you change the settings of "TV TYPE", "PARENTAL CONTROL" in "INITIAL SETUP 1" in the setup display "RESUME" appears in the front panel display and "When playing next time, disc restarts from point you stopped. If "RESUME" does not appear, Resume Play is not available. Each time you press the button, the value for DNR changes as follows: 0m1m2m3 With DVDs on which multilingual sounds are recorded, you can select the language you want while playing the DVD. With multiplex VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. In this case, the sound loses the stereo effect. Each time you press the button, the indication and the language/sound from the speakers change as follows: pWhen playing a DVD 1/L : The sound of the left channel ?Depending on the DVD, you may not be able to change the languages even if multilingual sounds are recorded on the DVD. While playing the CD/VIDEO CD, if you turn off the player the standard stereo playback will be resumed. If the language is indicated in a four-digit number, refer to the Language Code List on page 48. With DVDs on which subtitles are recorded, you can turn the subtitles on and off whenever you want while playing the DVD. With DVDs on which multilingual subtitles are recorded, you can change the subtitles whenever you want while playing the DVD. When subtitles are turned off, press SUBTITLE ON/ OFF to turn on the subtitles. While playing a DVD, press SUBTITLE CHANGE repeatedly until the subtitles you want appear on the TV screen. The type and number of languages for subtitles vary from disc to disc. Depending on the DVD, you may not be able to change the subtitles even if multilingual subtitles are recorded on the DVD. [. . . ] The limitation varies from disc to disc; when it is activated, playback is completely prohibited, violent scenes are skipped or replaced with other scenes and so on. By using menu screens recorded on VIDEO CDs with PBC functions, you can enjoy playing simple interactive programs, programs with search functions, and so on. The longest sections of a picture or a music piece on a DVD; a movie, etc. Each title is assigned a title number enabling you to locate the title you want. [. . . ]