User manual SONY DVP-NC685V HOME THEATER GUIDE

[. . . ] CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. For customers in the U. S. A Owner's Record The model and serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. [. . . ] The higher the bit rate, the larger the amount of data. When the bit rate level is high, there is a large amount of data. However, this does not always mean that you can get higher quality pictures or sounds. LAYER Appears when the DVD has dual layers Indicates the approximate point where the disc is playing. If it is a dual-layer DVD, the player indicates which layer is being read ("Layer 0" or "Layer 1"). For details on the layers, see page 108 (DVD). 64 Using Various Functions with the Control Menu Locking Discs (Custom Parental Control) Z Using a registered password, you can set playback restrictions for the desired disc. You can set the same Custom Parental Control password for up to 50 discs. When you set the fifty-first disc, the first disc is canceled. The same password is used for both Parental Control (page 85) and Custom Parental Control. Select "CUSTOM PARENTAL CONTROL" after pressing DISPLAY. 12(27) 18(34) C 01:32:55 PLAY DVD OFF CUSTOM PARENTAL CONTROL ENTER Select: Setting the Custom Parental Control for a disc 1 2 Insert the disc you want to lock. If a disc is playing, press x to stop playback. Select "CUSTOM PARENTAL CONTROL" using M/m, then press ENTER. 12(27) 18(34) C 01:32:55 STOP DVD OFF ON PASSWORD CUSTOM PARENTAL CONTROL ENTER Cancel: Select: RETURN 3 Select "ON, " using M/m, then press ENTER. Select "PROGRAM" after pressing DISPLAY. When you select "ON, " the "PROGRAM" indicator lights up in green. x PROGRAM The default setting is underlined. · SET, : allows you to create your own program. · ON: plays Program Play. Indicator PROGRAM Select: 12(27) 18(34) C 01:32:55 OFF OFF SET ON PLAY DVD ENTER Cancel: RETURN Creating the program 1 Select "SET, " in "PROGRAM. " The programming display appears. "TRACK" is displayed when you play a VIDEO CD or a CD. PROGRAM ALL CLEAR 1. TITLE ­ ­ Set: Start: ENTER PLAY T ­­ 01 02 03 04 05 Quit: DISPLAY 2 Press , . It is ready to set the first title or track for Program Play. PROGRAM ALL CLEAR 1. TITLE ­ ­ Set: Start: ENTER PLAY Title Chapter T ­­ 01 02 03 04 05 C ALL 01 02 03 04 05 06 Quit: DISPLAY 68 Using Various Functions with the Control Menu 3 Select the title, chapter or track you want to program using M/m, then press ENTER. (You can also use the number buttons and ENTER button to make a selection. In this case, the selected number is displayed on the screen. ) x When playing a DVD When both titles and chapters are recorded on the disc, select the title, then the chapter. PROGRAM ALL CLEAR 1. TITLE ­ ­ Set: Start: ENTER PLAY T ­­ 01 02 03 04 05 C ALL 01 02 03 04 05 06 Quit: DISPLAY PROGRAM ALL CLEAR 1. [. . . ] 3 PHONES connector (95) Connect the headphones. 4 VOL dial (95) Adjusts the volume of the built-in speakers and the headphones. 5 HP SURROUND switch (95) Turns on and off the headphone surround function. 6 ORETURN button (39, 46) Press to return to the previously selected screen, etc. [. . . ]