User manual SONY DVP-NS33

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The mains lead must only be changed at a qualified service shop. To keep the disc clean, handle the disc by its edge. The use of optical instruments with this product will increase eye hazard. [. . . ] TVS DYNAMIC Creates one set of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TVS WIDE Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. See the explanations given for each item in the following section. TVS NIGHT Large sounds, such as explosions, are suppressed, but quieter sounds are unaffected. This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of "TVS WIDE" at low volume. TVS STANDARD Creates three sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). Use this setting when you want to use TVS with 2 separate speakers. When the playing signal does not contain a signal for the rear speakers, you cannot hear the surround effects. When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver). Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. The TVS effects do not work when using the Fast Play or Slow Play functions, even though you can change the TVS modes. If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, " " appears in the front panel display. This means that you can change the viewing angle. If subtitles are recorded on the discs, you can change the subtitles or turn them on and off whenever you want while playing the disc. Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. Depending on the DVD VIDEO, you may not be able to change the angles even if multi-angles are recorded on the DVD VIDEO. If "OFF" appears, the player does not support the subtitle signal format contained in the disc. To turn off the subtitles select "OFF" in step 2. You can adjust the video signal of the DVD, VIDEO CD, DATA CD/DATA DVD in JPEG format, or DATA CD/DATA DVD containing DivX video files from the player to obtain the picture quality you want. [. . . ] Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital. The rear channel is stereo and there is a discrete subwoofer channel in this format. dTS provides the same discrete channels of high quality digital audio. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital. [. . . ]