User manual SONY DVP-NS36

[. . . ] As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. refer servicing to qualified personnel only. Notice for customers in the United Kingdom and Republic of Ireland A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5AMP fuse approved by ASTA or BSI to BS1362, (i. [. . . ] " · When playing DVD-RW in VR mode: If you connected to an AV amplifier (receiver) using the DIGITAL OUT (COAXIAL or OPTICAL) jack and want to switch between the sound tracks, set "DOLBY DIGITAL" to "D-PCM" in "AUDIO SETUP. Each channel is output from a separate speaker. Rear (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound's monaural rear audio signals. You can check the audio signal format by pressing (audio) repeatedly during playback. If "DTS" in "AUDIO SETUP" is set to "OFF, " the DTS track selection option will not appear on the screen even if the disc contains DTS tracks (page 69). MPEG audio signals with more than two channels will appear as shown above (3/2. 1, 2/1), but only the Front (L) and Front (R) signals will be output from your two front speakers. When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. If the player is set up to output the signal from the DIGITAL OUT (OPTICAL or COAXIAL) jack, the surround effect will only be heard when "DOLBY DIGITAL" is set to "D-PCM" and "MPEG" is set to "PCM" in "AUDIO SETUP" (page 68). TVS DYNAMIC THEATER Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below). You can adjust the video signal of the DVD, VIDEO CD, DATA CD/DATA DVD in JPEG format, or DATA CD/DATA DVD containing DivX video files from the player to obtain the picture quality you want. Choose the setting that best suits the programme you are watching. When you select "MEMORY, " you can make further adjustments to each element of the picture (colour, brightness, etc. Depending on the DVD VIDEO, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to turn them off. You can change the subtitles if the DivX video file has an ". While playing a disc with subtitles, the subtitle may disappear when you press FAST PLAY or SLOW PLAY button. DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the colour intensity. DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and colour intensity. CINEMA 2: white colours become brighter and black colours become richer, and the colour contrast is increased. You can adjust each element of the picture individually. [. . . ] First three characters of the service number C 13 The disc is dirty or recorded in a format that this player cannot play (page 6). , Clean the disc with a soft cloth or check its format (page 2). The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same discrete channels of high quality digital audio found in "Dolby Digital" theatre surround sound systems. [. . . ]