User manual SONY DVP-NS72HP

[. . . ] Refer servicing to qualified personnel only. The following caution label is located on the laser protective housing inside the enclosure. Welcome! CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Thank you for purchasing this Sony CD/DVD Player. Before operating this player, please read this manual thoroughly and retain it for future reference. For customers in the U. S. A Owner's Record The model and serial numbers are located at the bottom of the unit. [. . . ] To return to normal play Press CLEAR or select "OFF" in Step 2. z You can set the player to "repeat" in stop mode as well. After pressing REPEAT to select the item you want to set, press H. Repeat Play starts. CLEAR REPEAT Repeating a specific portion (A-B Repeat Play) You can play a specific portion of a title, chapter, or track repeatedly. (This function is useful when you want to memorize lyrics, etc. ) ) H CLEAR 1 Press REPEAT during playback. The Control Bar appears. CHAPTER A-B 2 1 Press REPEAT repeatedly to select the item you want to set. x When playing a DVD (Program Play and Shuffle Play are set to "OFF") · DISC: Repeats all of the titles. · TITLE: Repeats the current title on a disc. · CHAPTER: Repeats the current chapter. During playback, when you find the starting point (point A) of the portion to be played repeatedly, press A-B. The starting point (point A) is set. A13 ­ 0:27:34 B 44 2 When you reach the ending point (point B), press A-B again. The set points are displayed and the player starts repeating this specific portion. When the same language is displayed two or more times, the DVD is recorded in multiple audio formats. x When playing a VIDEO CD or CD The default setting is underlined. · STEREO: The standard stereo sound · 1/L: The sound of the left channel (monaural) · 2/R: The sound of the right channel (monaural) Changing the Sound If the DVD is recorded with multilingual tracks, you can select the language you want while playing the DVD. If the DVD is recorded in multiple audio formats (PCM, Dolby Digital, or DTS), you can select the audio format you want while playing the DVD. With stereo CDs or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. (In this case, the sound loses its stereo effect. ) For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can select the left channel and hear the instruments from both speakers. Sound Adjustments Notes · For discs not in multiple audio format, you cannot change the sound. · While playing a DVD, the sound may change automatically. AUDIO DISPLAY 1 Press AUDIO during playback. The Control Bar is displayed. The number in parentheses indicates the total number of available audio signals. 1(4):ENGLISH continued 51 Checking the audio signal format If you press DISPLAY twice during playback, the format of the current audio signal (Dolby Digital, DTS, PCM, etc. ) appears as shown below. Example · Dolby Digital 5. 1 ch Rear (L/R) signals or the Dolby Digital sound's monaural rear audio signals. · LFE (Low Frequency Effect) signal Note If "DTS" is set to "OFF" in "AUDIO SETUP, " the DTS track selection option will not appear on the screen even if the disc contains DTS tracks (page 73). DOLBY DIGITAL 3 / 2 . 1 Front (L/R) + Center LFE (Low Frequency Effect) · Dolby Digital 3 ch DOLBY DIGITAL 2/1 Front (L/R) Rear (monaural) · PCM (Stereo) Sampling frequency PCM 96kHz 24bit Quantized bit rate 52 About audio signals Audio signals recorded in a disc contain the sound elements (channels) shown below. Each channel is output from a separate speaker. [. . . ] When the input signal contains a surround component, the Pro Logic process outputs the front, center, and rear signals. The rear channel is monaural. DTS (page 22, 73) A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single-sided DVD is 4. 7 GB (Giga Byte), which is 7 times that of a CD. The data capacity of a double-layer and single-sided DVD is 8. 5 GB, a single-layer and doublesided DVD is 9. 4 GB, and double-layer and double-sided DVD is 17 GB. [. . . ]