User manual SONY DVP-NS730P

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. The power requirements and power consumption of this unit are indicated on the back of the unit. Check that the unit's operating voltage is identical with your local power supply. [. . . ] The sound is muted when using this function. You can divide the screen into 9 subscreens and display the first scene of titles, chapters, or tracks. You can also play back from the selected title, chapter, or track. After performing step 3 of "Searching by Scene (PICTURE NAVIGATION)" above, select the scene using C/X/x/c and press ENTER. Z Hint If there are more than 9 titles, chapters, or tracks, V is displayed at the bottom right. To display the additional titles, chapters, or tracks, select the bottom right scene (the position 9) and press x. To return to the previous scene, select the top left scene (the position 1) and press X. Refer to the explanations given for each item in the following sections. To return to normal play You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/CD text or track name (MP3 audio) recorded on the disc. *:* (minutes: seconds) Playing time of the current scene When playing a VIDEO CD (without PBC functions) or CD · *:* (minutes: seconds) Playing time of the current track When playing a Super VCD · To check the DVD/CD text or track and album names (MP3 audio) The display and the kinds of time that you can change depend on the disc you are playing. For DATA CDs, the track and album names of the MP3 audio track appears (page 47). You can view the time information and text displayed on the TV screen also on the front panel display. The information on the front panel display changes as follows when you change the time information on your TV screen. Playing time and number of the current track Current track and index number (returns to top automatically) When playing VIDEO CDs with PBC functions, the scene number or the playing time are displayed. Long text that does not fit in a single line will scroll across the front panel display. You can also check the time information and text using the Control Menu (page 12). Depending on the type of disc being played, the DVD/CD text or track name may not be displayed. The player can only display the first level of the DVD/CD text, such as the disc name or title. Playing time of MP3 audio tracks may not be displayed correctly. Playing time and number of the current track You can check information such as the bit rate or the disc layer that is being played. Press DISPLAY repeatedly until the Control Menu is turned off. [. . . ] Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. When the input signal contains a surround component, the Pro Logic process outputs the front, centre and rear signals. The rear channel is stereo and there is a discrete subwoofer channel in this format. [. . . ]