User manual SONY DVP-NW50

[. . . ] 2-584-978-11(1) Compact Disc Player CDP-NW10 DVD Player DVP-NW50 User's Manual 2005 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the ground system of the building, as close to the point of cable entry as practical. If you have any questions about this product, you may call; Sony Customer Information Service Center 1-800-222-7669 or http://www. sony. com/ The number below is for the FCC related matters only. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Regulatory Information Declaration of Conformity Trade name: SONY Model No. : CDP-NW10/DVP-NW50 Responsible Party: Sony Electronics Inc. Telephone No. : 858-942-2230 This device complies with Part 15 of the FCC Rules. [. . . ] Normal/PS (4:3 PAN SCAN) Setting the language and playback restriction (Preference) Choose settings according to the TV to be connected. 1 Press DVD SETUP on the remote when the Unit is in stop mode. Press G/g to select (Preference, ) then press ENTER or f on the remote. The options for "Preference" appear. 2 Chapter 4 Playing Discs (DVP-NW50 only) Select this when you connect a 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. Normal/LB (4:3 LETTER BOX) Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 16:9 Wide 3 Press F/f to select an option, then press ENTER on the remote. The options for the selected item appear. Select this when you connect a widescreen TV or a TV with a wide mode function. Angle Mark (page 26) When you select "ON, " and various angles (multi-angles) for a scene are recorded on the DVD VIDEO, an angle mark is displayed on the TV screen. The default setting is "ON. " OSD Lang (On-Screen Display Language) 4 Press F/f to select an item, then press ENTER on the remote. Audio (page 26) Switches the language of the sound track. Subtitle (page 26) Switches the display language on the screen. Captions Switches the language of the subtitle. Disc Menu The hidden subtitle is displayed or turn off. The default setting is "ON. " Screen Saver Select the desired language for the disc menu. Parental (page 27) The screen saver image appears when you leave the Unit in pause or stop mode for five minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press any button to turn off the screen saver. The default setting is underlined. ON OFF Turns on the screen saver. Turns off the screen saver. Playback of some DVD VIDEOs can be limited according to a predetermined level, such as the age of the users. Password (page 27) Set the 4-digit password in parental control. Continue to the next page l 29US Using the Setup Display (DVD Settings) (continued) Default (this page) All the settings explained on pages from 28 to 29 return to the default settings. Tip If you select "OTHERS" in "Audio, " "Subtitle, " or "Disc Menu, " select and enter a language code from the language code list (page 55) using the numeric buttons. 4 Select "Reset, " then press ENTER on the remote. All the settings explained on pages from 28 to 29 return to the default settings. Do not press X/1 (POWER) while resetting the Unit. It may take a few seconds to complete. Chapter 4 Playing Discs (DVP-NW50 only) To reset all of the settings 1 Press DVD SETUP on the remote when the Unit is in stop mode. The Setting Menu appears. 2 Press G/g to select (Preference, ) then press ENTER on the remote. The options for "Preference" appear. 3 Press F/f to select "Default, " then press ENTER on the remote. 30US Chapter 5 Listening to the Radio You can tune in stations on the Unit by preset tuning or manual, automatic, or direct tuning. Enjoying Radio and Other Component This chapter describes how to receive FM/AM stations, and listen to sound from a component connected to LINE IN using the Unit. Listening to a preset station Preset FM/AM radio stations in the Unit's memory first. For details on how to preset radio stations in the Unit, see page 33. 1 Press "TUNER" SELECT on the Home Menu. The display changes to the Tuner display, then the Preset station list appears. Chapter 5 Enjoying Radio and Other Component 2 Press any SELECT. The display changes to the current station display. Listening to a non-preset station 1 Press the "TUNER" SELECT on the Home Menu. [. . . ] , The remote is not pointed at the remote sensor on the Unit. , The batteries in the remote are weak. 51US Troubleshooting (continued) The language for the sound track cannot be changed. , Multilingual tracks are not recorded on the DVD being played. , The DVD prohibits changing the language for the sound track. [. . . ]