User manual SONY DVP-S505D

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains cord must only be changed at qualified service shop. The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD Player is harmful to eyes, do not attempt to disassemble the cabinet. [. . . ] To enter a new password, follow the procedure from Step 4 again. When you play DVDs which do not have the Parental Control function, playback cannot be limited on this player. When you do not set a password, you cannot change the settings for playback limitation. Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter the password, then change the level. When you stop playing the DVD, the level returns to the original level. Hold down POWER, and enter your TV's manufacturer's code in the table below using the number buttons. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. If you enter a new code number, the code number previously entered will be erased. When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Hold down POWER, and enter your AV amplifier's input connector code in the table below using the number buttons. * If you connect the player to the SONY Mini Hi-Fi Component System, enter "98". When you press AV CENTER on the supplied remote, you can set the input of AV amplifier to the player. ** You can also change the volume of the sound using AV VOL. You can control your TV using the buttons below. Turn on or off the TV Select the input source for the TV Swiches the wide mode of the TV Adjust the volume of the TV Change the channel of the TV ** If you connect the player to the SONY Mini Hi-Fi Component System, press AV CENTER repeatedly to change the input of the system. Depending on the TV, you may not be able to control your TV or to use some buttons above. Using the setup display, you can do the initial setup, adjusting the picture and sound quality, setting the various outputs, etc. You can also set a language for the subtitles and the setup display, limit playback by children, etc. Select the setting you want using >/. To cancel using the setup display on the way Some setup display items require operations other than selecting the setting. When you select a language that is not recorded on the DVD, one of the recorded languages is automatically selected except for "OSD". [. . . ] Each track is assigned a track number enabling you to locate the track you want. Various angles, or viewpoints of the video camera, for a scene are recorded on some DVDs. The picture data is compressed to about 1/140 of its original size. Consequently, a 12 cm VIDEO CD can contain up to 74 minutes of moving pictures. [. . . ]