User manual SONY DVP-SR201P REFERENCE GUIDE

[. . . ] Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle's battery. [. . . ] RIGHT ( ) Button Allows the user to shift to the right in the menu options. PIX Button (PICTURE SELECT) Each time this button is pressed, the OSD will display the "adjustment bars" for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed. VOLUME DOWN (-) Button* Use this button to decrease the volume level of the wired headphone jacks. It is also used to make picture adjustments in picture select mode. -13- 128-7252A 13 of 35 38. VOLUME UP (+) Button* Use this button to raise the volume level of the wired headphone jacks. It is also used to make picture adjustments in picture select mode. Note: The volume buttons will not affect the volume of wireless headphones or the wireless FM Mmodulator. When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio's volume control (see page 16, Headphones, or page 17, Wireless FM Modulator). 39. NUMBER Buttons Allows the user to enter numbers 0 to 9 for selection of CD tracks, DVD chapters, and password setting. IRTA ON/OFF Buttons Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel A. DVD Basics To get the optimum use out of the DVD player, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don't match, the disc won't play. Other regional codes cannot be played in this unit. The unit will display "WRONG REGION. " -18- 128-7252A 18 of 35 Types of Discs your DVD will play · · · DVD discs ­ DVDs discs which contain video. Audio discs ­ Audio CDs that contain music or sound content only. MP3 discs ­ A disc that contains audio files (for example, a CD-R/CD-RW with downloaded MP3 files). Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player. Note: the following Discs CANNOT be used with this player : · MiniDisc · Laserdisc · CD-I, CD-ROM, DVD-ROM To load and Play a Disc When you press the Power button the unit will turn on and display the source selected. Select DVD mode and insert the disc (Label Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play will begin. [. . . ] This DVD player only plays DVD's, audio CDs and MP3s. · Both the unit and the disc are coded by region. If the regional codes don't match, the disc can't be played. This DVD player is Region Number 1. Can't advance through a movie · You can't advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. -31- 128-7252A 31 of 35 PROBLEM The icon ( appears on screen ) SOLUTION The feature or action cannot be completed at this time because: 1. [. . . ]