User manual SONY DVP-SR700H

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Welcome! Thank you for purchasing this Sony CD/DVD Player. Before operating this player, please read this manual thoroughly and retain it for future reference. Precautions Safety · This unit operates on 100 ­ 240 V AC, 50/60 Hz. Check that the unit's operating voltage is identical with your local power supply. [. . . ] To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. Display of each item By pressing DISPLAY repeatedly, you can display either "BIT RATE" or "LAYER, " whichever was selected in "ADVANCED. " BIT RATE Indicates the approximate point where the disc is playing. If it is a dual-layer DVD, the player indicates which layer is being read ("Layer 0" or "Layer 1"). For details on the layers, see page 98 (DVD VIDEO). Checking the play information of DATA-CD or "MG Memory Stick" BIT RATE 384kbps 0 5 10 Mbps By pressing TIME/TEXT while playing MP3 audio track on a DATA-CD or ATRAC3 audio track on an "MG Memory Stick" you can display the audio bit rate (the amount of data per second of the current audio). Bit rate T 17:30 128k Audio Video When playing MPEG audio sound track BIT RATE 0 0 5 kbps 1000 10 Mbps Audio Video KARAOKE RIVER SIDE Album name Bit rate refers to the amount of video/audio data per second in a disc. The higher the bit rate, the larger the amount of data. When the bit rate level is high, there is a large amount of data. However, this does not always mean that you can get higher quality pictures or sounds. Track/file name 56 2 Press X/x to select Sound Adjustments (AUDIO), then press ENTER. The options for "AUDIO" appear. 12(27) 18(34) T 1:32:55 1: ENGLISH 1: ENGLISH 2: ENGLISH 3: FRENCH Changing the Sound If the DVD VIDEO is recorded with multilingual tracks, you can select the language you want while playing the disc. If the DVD VIDEO is recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio or DTS), you can select the audio format you want while playing the disc. With stereo CDs, DATA-CDs, VIDEO CDs or "MG Memory Stick, " you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. (In this case, the sound loses its stereo effect. ) For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can select the left channel and hear the instruments from both speakers. DVD VIDEO PROGRAM FORMAT DOLBY DIGITAL 3/2. 1 L LS C LFE RS R 3 Press X/x to select the desired audio signal. x When playing a DVD VIDEO Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they represent the language code. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV 4 Press ENTER. To reset the TVS setting In Step 3, select "OFF. " To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. TVS NIGHT The large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you do not want to disturb other people but still want to hear the dialog and enjoy the surround sound effects of "TVS WIDE. " 60 TVS STANDARD Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers and retain the sound quality. L R Sound Adjustments L: Left front speaker R: Right front speaker : Virtual speakers z You can select "TVS" directly by pressing SURROUND. Each time you press the button, the item changes. If you select any setting other than "OFF, " the SURROUND indicator on the player lights up. Notes · When you select an effect, the sound cuts off for a moment. · When the playing signal does not contain a signal for the rear speakers (page 58), the surround effects may be difficult to hear. · When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver). · Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. Otherwise, the TVS effect may be hard to discern. · "TVS NIGHT" works only with Dolby Digital and MPEG audio. [. . . ] When the input signal contains a surround component, the Pro Logic process outputs the front, centre, and rear signals. The rear channel is monaural. continued , 97 DVD VIDEO (page 7) Parental Control (page 78) A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. The data capacity of a single-layer and single-sided DVD is 4. 7 GB (Giga Byte), which is 7 times that of a CD. The data capacity of a double-layer and single-sided DVD is 8. 5 GB, a single-layer and doublesided DVD is 9. 4 GB, and double-layer and double-sided DVD is 17 GB. [. . . ]