User manual SONY DVP-S7000

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. [. . . ] The program remains even after the Program Play ends when you press · , you can play the same program again. If "RESUME" does not appear, Resume Play is not available. press · The player starts playback from the point you stopped the disc in Step 1. To play from the beginning of the disc When "RESUME" appears on the front panel display before you start playing, press to turn off "RESUME, " then press · The number of titles, chapters or tracks displayed are that of the titles, chapters or tracks recorded on a disc. ⷠThe program is canceled when: ­ you open or close the disc tray ­ you turn the power off · You may not be able to do Program Play depending on the DVD. You may not do Resume Play depending on the DVD. Depending on where you stopped the disc, the player may resume playback from a different point. ⷠThe point where you stopped playing is cleared when: ­ you open or close the disc tray ­ you disconnect the AC power cord ­ you change the play mode ­ you start playback after selecting a title, chapter or track ­ you change the setting of "VIDEO ASPECT RATIO, " "DVD MENU LANGUAGE" or "PARENTAL CONTROL" in "INITIAL SETUP" in the menu You can make the picture clearer by reducing the picture noise. With DVDs on which multilingual sounds are recorded, you can select the language you want while playing the DVD. With multiplex VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. In this case, the sound loses the stereo effect. Each time you press the button, the indication and the language/sound from the speakers change as follows: Each time you press the button, the value for DNR changes as follows: OFF m 1 m 2 m 3 Once Twice Three times However, afterimages may increase. Depending on the disc, the effect may be difficult to tell. ⷠThe setting for DNR returns to OFF when: ­ you turn the power off ­ you open or close the disc tray You will hear The sound of the left channel The sound of the right channel The standard stereo sound You can also use the menu to switch the sound for the VIDEO CD or the CD press MENU to display the menu. Then select "L/R/ STEREO" in "CUSTOM SETUP" to change the sound (page 46). However, this setting does not affect the output from the DIGITAL OUT connectors when you play a CD. Depending on the DVD, you may not be able to change the languages even if multilingual sounds are recorded on the DVD. ⷠWhen you turn off the player, the standard stereo playback will be resumed. With DVDs on which sub-titles are recorded, you can turn the sub-titles on and off whenever you want while playing the DVD. With DVDs on which multilingual sub-titles are recorded, you can change the sub-titles whenever you want while playing the DVD. When sub-titles are turned off, press SUB-TITLE ON/ OFF to turn on the sub-titles. While playing a DVD, press SUB-TITLE CHANGE repeatedly until the sub-titles you want appear on the TV screen. [. . . ] Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental Control functions are provided with the DVD. Sections of a picture or a music piece on a CD or VIDEO CD. Each track is assigned a track number enabling you to locate the track you want. The picture data is compressed to about 1/140 of its original size. [. . . ]