Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY DVS9000E. We hope that this SONY DVS9000E user guide will be useful to you.
Lastmanuals help download the user guide SONY DVS9000E.
Detailed instructions for use are in the User's Guide.
[. . . ] SWITCHER PROCESSOR PACK
DVS-9000-C DVS9000SF-C
PRODUCTION SWITCHER PROCESSOR
DVS-9000 DVS-9000SF
HK-PSU04 BKDS-9160 BKDS-9161 BKDS-9162 BKDS-9210 MKS-8110SD MKS-8111SD
INSTALLATION MANUAL 1st Edition
!WARNING
This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
! [. . . ] S501 (A-4) : Modes setting switch for the COM CPU-1 Sets the modes of the COM CPU-1. Default setting when shipped from the factory is all OFF. S502 (A-4) : Monitor reset switch for the COM CPU-1 Pressing this switch resets the system while maintaining this unit through the COM CPU-1 control terminal. S701 (A-4) : Modes setting switch for the COM CPU-2 Default setting when shipped from the factory is all OFF. S702 (A-4) : Monitor reset switch for the COM CPU-2 Pressing this switch resets the system while maintaining this unit through the COM CPU-2 control terminal. <Connector> CN103 (A-4) : TERMINAL pin This pin is connected to the main CPU control terminal and used during maintenance. Conforms to RS-232C.
DVS-9000/9000SF
1-15
1-8. Checks on Completion of Installation
CN503 (A-5) : TERMINAL pin This pin is connected to the COM CPU-1 control terminal and used during maintenance. CN703 (A-5) : TERMINAL pin This pin is connected to the COM CPU-2 control terminal and used during maintenance. CN1003 (A-3) : ISP common connector Used only for production in the assembly factory. Used for program writing into the JTAG device with ISP. CN1002 (A-5) : TERMINAL pin This pin is connected to the S-BUS CPU control terminal and used during maintenance. <TEST terminal> E1 (E-5), E2 (E-1), E3 (C-3), E4 (A-5), E5 (A-1) : GND terminal Use this terminal as the earth point for measuring the respective check terminals. TP101, TP102, TP103, TP104 (A-4) : Main CPU status check terminal Main CPU status check terminal. TP501 (A-4), TP502, TP503, TP504 (A-5) : COM CPU-1 status check terminal COM CPU-1 status check terminal. TP701, TP702, TP703, TP704 (A-5) : COM CPU-2 status check terminal COM CPU-2 status check terminal. TP1001 (A-1) : +3. 3 V check terminal +3. 3 V measuring terminal. TP1002 (A-1) : +12 V check terminal +12 V measuring terminal. TP1003 (A-1) : +5 V check terminal +5 V measuring terminal. TP1031 (D-4) : SBUS RX check terminal S-BUS communication line measuring terminal.
<LED on the CPU DR module> : Main CPU D10 (green) (A-1) : RUN status LED RUN status indication. Lit when the CPU-DR module starts operating. D12 (green) (A-4) : CD (Card Detect) status LED Lit when the CPU-DR module is inserted correctly into the parent board. [. . . ] (Refer to Section 1-4. )
Connect it correctly.
YES
NO Are the input and output cables connected correctly?
Check connections of the input and output equipment.
The power supply unit is probably defective.
YES
Is the Software installed correctly?
NO
Install the software correctly. (Refer to the User's Guide. )
The main power of the DVS-9000SF cannot be turned on. (Indicator does not light green. )
The main power of the DVS-9000SF cannot be turned on. (Indicator does not light green. )
YES
The DVS-9000/9000SF is probably defective.
Is the POWER switch A of the DVS-9000SF turned ON? [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY DVS9000E
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY DVS9000E will begin.
