User manual SONY DVX-11B

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. This label is located on the bottom of the chassis. [. . . ] To change the settings, enter your password number, then press (ENTER). If a wrong number is entered, press < to move the cursor and enter the number again. The lower the number, the stricter the restriction level. Note When you play discs which do not have the parental control, playback cannot be restricted on this unit. Press M/m to select the desired area to apply its movie ratings, then press (ENTER). When you want to select the standard on the "Area code list" (page 25), select "OTHERS t, " then enter its code number using the number buttons. Press (SETUP) while playback is being stopped. Press the number buttons to enter your 4-digit password, then press (ENTER). When a wrong number is entered, press < to move the cursor and enter the number again. Press the number buttons to enter a new 4-digit password, then press (ENTER). To confirm, press the number button to enter your new 4-digit password again, then press (ENTER). By using the Setup menu, you can make various adjustments to items, such as picture and sound. You can also set a language for the subtitle and the on-screen display, among other things. For details on each setup items, see pages from 27 to 29. Note Playback settings stored in the disc take priority over the Setup menu settings and not all the functions described may work. Select " " (RESET) in step 2, then press (ENTER). Note Do not turn off the unit while resetting the Setup menu item as it takes a few seconds to complete. Setting the display language or sound track -- Language setup "LANGUAGE SETUP" allows you to set the desired language for the on-screen display or sound track accordingly. The setting items with "*" in the tables below are the default settings. Select this when you connect a wide-screen monitor or a monitor with a wide mode function. Displays a wide picture with bands on the upper and lower portions of the screen. Select this when you connect a 4:3 screen monitor. [. . . ] When the input signal contains a surround component, the Pro Logic process outputs the front, centre and rear signals. The rear channel is stereo and there is a discrete subwoofer channel in this format. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital. A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. [. . . ]