User manual SONY EBS-SP35

[. . . ] Sony EBS-SP35 User Guide Enseo, Inc. 401 International Parkway Suite 100 Richardson, Texas 75081 www. Enseo. com 21 Copyright 2006 ­ Enseo, Inc. 1 Introduction The EBS-SP35 is a professional tri-band tuner providing 8VSB, QAM and NTSC tuner function for connection to a line of Sony Professional LCD and Plasma displays. The EBS-SP35 includes support for Pro:IdiomTM decoding on lodging systems supporting this encryption technology. [. . . ] Show Message (Yes/No) Line 1: First line of text Line 2: Second line of text 21 Copyright 2006 ­ Enseo, Inc. 10 Control Options This setup section provides system level settings for the EBS-SP35. ESP (Energy Savings Protection) This menu item allow for a setting of a default time off to protect against a TV being left on when a guest leaves a room without turning off the TV. The mode can be set On or Off, and the hours of inactivity until it turns itself off can be 1 to 9 hours. Source Menu Item This menu item is a Yes/No selection and allows control over whether a user, through the user menu, has access to input selection. Picture Format Menu Item This menu item is a Yes/No selection and allows control over whether a user, through the user menu, has access to change the Image Format (widescreen or native). Note: This option will be No on all Plasma monitors to prevent image retention Minimum Volume Set the available minimum volume from 0 to 99 Maximum Volume Sets the available maximum volume from 0 to 99 Security Provides a Standard and High level of security based on the determination of the system administrator. If high security is needed, please contact your Sony representative for details on this technical implementation. 21 Copyright 2006 ­ Enseo, Inc. 11 Captioning Options This submenu is used to control the default values for the Closed Captioning function on the EBS-SP35 device. Restore User Setting This setting allows for the selection of allowing user settings for CC to be stored between power cycles, or to always use a default setting on power on. Select YES to override the previous user CC setting on power on, or select NO to allow the previous user setting to be used on the next power on. Captioning This setting allows an ON or OFF setting for CC as a default power on status. Digital Captioning Mode This setting allows the selection of the CC mode to be used for the Digital Channels Analog Captioning Mode This setting allows the selection of the CC mode to be used for the Analog Channels 21 Copyright 2006 ­ Enseo, Inc. 12 V-Chip Options This submenu sets up default options for the V-Chip settings. Restore User Setting This setting allows for the selection of allowing user settings for V-Chip to be stored between power cycles, or to always use a default setting on power on. Select YES to override the previous user V-Chip setting on power on, or select NO to allow the previous user setting to be used on the next power on. V-Chip Menu Item This setting controls whether the user has access to the V-Chip selection and settings. Selecting YES will allow the V-Chip menu item to appear on the user menu. Selecting NO will cause the V-Chip settings to no be user accessible and they will not appear on the user menu. Reset Access Code This is an open setting to allow for the reset of the code. In set up mode, this code can be overwritten without knowing the previous code. This is useful incase the previous user forgot the code. The code will be reset to the default code of 0000 Default Limits This section allow for various default values to be set for the EBS-SP35. Enable V-Chip This setting is a YES/NO selection. Using the numeric keys on the remote, enter the channel that has been identified by your system administrator for firmware updates. Allow Update Searching This YES / NO selection either allows or prohibits the display from searching for an update channel for firmware updates. Having this selected as YES will allow updates when the Update Channel needs to be changed for some reason. Start Firmware Update To manually initial a firmware update, press the Right arrow button on the remote from this menu line. [. . . ] Power the Sony Display back on with the remote The Sony display will now respond to the Sony remote for menu and other display functions. Note: If the Communication Cable is removed while the display is on, the Sony display may not respond to the remote or buttons. To correct this, unplug the power to the display and EBSSP35, attached the Communication Cable between display and EBS-SP35. Apply power to the display and EBS-SP35. [. . . ]