User manual SONY EXCD-21

[. . . ] -- Consult the dealer or an experienced radio/ TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. ) enables you to enjoy 4-speaker systems. ⷠLine outputs for connecting an optional power amplifier. [. . . ] Set the clock after you have turned on the radio, or during CD playback. Note If you leave the ejected disc in the disc insertion slot after you have pressed the 6 button, the disc will automatically retract into the unit after about 15 seconds in order to protect it. During playback, press either side of the SEEK/AMS/MANU button once for each track you wish to skip. During playback, press and hold either side of the SEEK/AMS/MANU button for more than two seconds. Release the button when you have found the desired part. If you reverse to the beginning of the disc, "_ _ " appears on the display. forwarding to the end of the disc causes " _ _" to be displayed. In either case, you can neither proceed to the previous nor the following track. The first 10 seconds of all the tracks are played. When you find the desired track, press the button once more. When the currently played track is over, it will be played again from the beginning. Release the button when the desired station is received. Press either side of the SEEK/AMS/MANU button once to search for the next station (automatic tuning). When tuning in during driving, use automatic tuning. Press either side of the SEEK/AMS/MANU button repeatedly until the desired station is received. When an FM stereo program with sufficient signal strength is tuned in, Stations with the clearest reception are automatically searched and memorized on each band (FM I, FM II, FM III and AM). Up to 6 stations on each band can be stored on the preset number buttons 1 to 6 in the order of band frequency. To keep the automatic tuning from stopping on stations too frequently (local seek mode), press the SENS button momentarily to get the "LOCAL" indication. Only the stations with relatively strong signals will be tuned in. The unit will be start scanning the selected band and memorize the tuned stations on the preset number button 1 through 6 automatically. Tune in the station which you wish to store on a preset number button. Press and hold the desired preset number button ( 1 to 6 ) for about two seconds until you hear a beep tone. [. . . ] Problem No sound The contents of the memory have been erased. When the AMP/ANT REM lead is connected to the power antenna, the antenna will be extended as long as the unit is turned on. Press the 6 button for more than two seconds. The unit is installed at an angle of more than 20°. [. . . ]