User manual SONY EXR-400

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] If there are only a few stations received, some preset number buttons will remain empty. When there is a preset number indicated on the display window, the unit will store stations on all preset number buttons from the one currently displayed. Each time you press (DSPL), the display item changes as follows: Up to 6 stations on each band (FM1, FM2, FM3, AM1 and AM2) can be stored on the preset number buttons in order of your choice. Therefore, 18 stations can be memorized on FM. If you try to store another station on the same preset number button, the previously stored station will be erased. Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning). the scanning stops when a station is received. Press either side of the button repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (SENS/BTM) momentarily until "LCL" lights up on the display (local seek mode). Only the stations with relatively strong signals can be tuned in. Tip If you know the frequency, press and hold either side of (SEEK/AMS) until the desired station is received (manual tuning). When a CD changer is connected, all the tracks play from the beginning. Each time you press (DSPL) momentarily during CD playback, the displayed item changes as follows: Adjust within three seconds after selecting. (After three seconds the button will again serve as volume control button. During playback, press either side of (SEEK/AMS) the number of times you wish to skip the tracks. During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired part. To obtain the beep tone again, press these buttons once more. During playback, press either side of (PRESET/DISC). The first 10 seconds of all the tracks on the currently selected disc are played in order. [. . . ] In order to prevent this, open the front panel by pressing (RELEASE), then detach it and clean with a cotton swab dipped in alcohol. Otherwise, the connector may get damaged. Back of the front panel You can control this unit with the optional rotary remote (RM-X2S). Some labels are supplied with the rotary remote. [. . . ]