Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY EXR-12. We hope that this SONY EXR-12 user guide will be useful to you.
Lastmanuals help download the user guide SONY EXR-12.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not tamper with the four holes on the upper surface of the unit. They are for tuner adjustments to be done only by service technicians. If you mount other Sony equipment with this unit, it is better to mount this unit in the lower position. There must be a distance of at least 15 cm between the cassette slot of the unit and shift lever in order to insert a cassette easily. [. . . ] Choose the installation location carefully so the unit does not interfere with gear shifting and other driving operations. Choose the installation location carefully so that the unit will not interfere with normal driving. Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near heater ducts. Use only the supplied mounting hardware for a safe and secure installation. How to detach and attach the front panel Before installing the unit, detach the front panel. Before detaching the front panel, be sure to press (OFF). Press (OPEN), then slide the front panel to the right side, and pull out the left side. Attach part a of the front panel to part b of the unit as illustrated and push the left side into position until it clicks. Bend these claws outward for a tight fit, if necessary. First attach 5 to the unit, then insert the unit into 1. If the frequency allocation system of your country is based on 10 kHz (200 kHz) interval, set the switch on the bottom of the unit to the 10 K (200 K) position before making connections. When the installation and connections are complete, be sure to press the reset button with a ballpoint pen etc. For connecting two or more changers, the source selector XA-C30 (optional) is necessary. Be sure to connect the earth cord before connecting the amplifier. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Be sure to leave some slack in the connecting cord between the plug and the cramper. To connect to AMP REMOTE IN of the optional power amplifier This connection is only for amplifiers. Connecting any other system may damage the unit. To the power aerial control lead or power supply lead of aerial booster amplifier <Note> It is not necessary to connect this lead when there are no power aerials or aerial boosters. To the +12 V power terminal which is energized at the accessory position of the ignition key switch Be sure to connect the black earth lead first. [. . . ] To the power aerial control lead or power supply lead of aerial booster amplifier <Note> It is not necessary to connect this lead when there are no power aerials or aerial boosters. To the +12 V power terminal which is energized at the accessory position of the ignition key switch Be sure to connect the black earth lead first. To the +12 V power terminal which is energized at all times Be sure to connect the black earth lead first. To a metal place in the car First connect the black earth lead, then connect the yellow and red power input leads. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY EXR-12
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY EXR-12 will begin.
