User manual SONY EXR-15

[. . . ] Card remote commander RM-X111 (DISC) (m): to select downwards In menu mode, the currently selectable button(s) of these four are indicated with a " v" in the display. Note If the display disappears by pressing (OFF), it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. H SOUND button 21 i OFF (Stop/Power off) button 6, 9, 22, 25 j VOL (+/­) buttons To turn up or down the volume. You cannot connect any optional CD/MD units at the same time. [. . . ] You can use this function for discs that have been assigned custom names*1 or for CD TEXT discs*2. *1 Locating a disc by its custom name: when you assign a name for a CD (page 12) or an MD. *2 Locating discs by the CD TEXT information: when you play a CD TEXT disc on a CD unit with the CD TEXT function. When tuning in stations while driving, use Best Tuning Memory to prevent accidents. The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. Press (MENU), then press M or m repeatedly until "BTM" appears. Note Some letters cannot be displayed (exception: the letters stored by Disc Memo). If only a few stations can be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Press the number button ((1) to (6)) on which the desired station is stored. You can manually preset the desired stations on any chosen number button. Within 5 seconds, press the number button of the local station again. Repeat this procedure until the desired local station is received. The unit switches back to the original source when the bulletin is over. The unit will continue searching for stations available with TP if "NO TP" is indicated. When you preset RDS stations, the unit stores each station's AF/TA setting (on/off) as well as its frequency. You can select a different setting (for AF, TA, or both) for individual preset stations, or the same setting for all preset stations. If you preset stations with "AF on, " the unit automatically stores stations with the strongest radio signal. Press (MENU), then press M or m repeatedly until "BTM" appears. Presetting different settings for each preset station You can preset the volume level of the traffic announcements so you won't miss hearing them. " Press the desired number button ((1) to (6)) for 2 seconds until "MEM" appears. Repeat from step 1 to preset other stations. [. . . ] Before going through the checklist below, check the connection and operating procedures. The CD is forcibly inserted upside down or in the wrong way. You tried to playback a CD-R/CD-RW not designed for audio use. Some CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. [. . . ]