User manual SONY EXR-500

[. . . ] Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ] one click of (SEEK) ­/+ represents 2 cm. On the card remote commander, pressing M or m changes in 2 cm and pressing and holding changes in 10 cm steps. 5 Confirm your settings using the confirmation screen, and save the value. "Custom1, " "Custom2" and "Custom3" appear with a pencil icon after saving, e. Note The adjustment will not be applied until it is saved in step 5. Note The pencil icon appears only after selecting the preset in step 3, however, until it is saved in step 6, the adjustment will not be applied. I-TA Tuning sets a precise delay for sound to reach the listener from the car speaker. Smart mode allows you to choose one of 4 preset positions which you can then easily fine adjust. This section explains how to create the ideal listening field within the car, making extensive use of I-TA Pro mode and HDEQ. Example of vocal localization of sound* in the listening position at front left seat. 2 Measure the distance between your listening position and each speaker. *1 When one or more CD/MD changers are connected. *2 When one or more CD changers, or two or more MD changers are connected. To return to normal play mode, select "Repeat off" or "Shuffle off. " Tip "Shuffle All" will not shuffle tracks between CD units and MD changers. Be sure to adjust the volume for each connected audio device before playback. 4 Set your usual listening volume on the unit. 5 Adjust the volume level, following "Adjusting menu items-MENU" (page 16). The input level is adjustable from ­6 dB to +6 dB. You can select a disc from the list when a CD changer with CD TEXT capability, or MD changer is connected. 2 Press (GP/ALBM) +/­ repeatedly until "LIST" appears, then press (ENTER). With the card remote commander During playback, press (LIST). [. . . ] T Press (SOURCE) until "MS" or "MD" appears, then press (MODE) repeatedly. The disc cannot play because of some problem. The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI Seek" appears). NO Group Name A group name is not written in the track. [. . . ]