User manual SONY EXS313

[. . . ] BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. This product contains software owned by Sony and licensed by third parties. [. . . ] Each menu presents options for modifying the system configuration. Use the left and right arrow keys to select a menu from the menu bar. Use the up and down arrow keys to select items within a menu. Once an item is highlighted, use the plus/minus (+/-) keys to modify a setting. If an item has a triangle ( ) to its left, this indicates that a sub-menu of options is available. If a submenu contains items with a triangle, there is another layer of options from which to select. 4 5 Once you select an option, press ESC to back out of each menu until you reach the top level, where the menu bar appears. To exit the BIOS setup utility, press ESC from any top-level screen and follow the prompts. Configuring Your System 23 Changing the Display's Power Management Settings A display that has power management capability is designed to operate on reduced power or shut itself off after the system has been idle for a specified period of time. 1 From the Start menu, point to Settings, click Control Panel, then click Display. The Power Options Properties dialog box opens, with the Power Schemes tab displayed. 2 Select the power scheme that is most appropriate for the way you use your computer. To change a power scheme, change the settings for Turn off monitor, and Turn off hard disks, System stand by, and System hibernates. 24 VAIO Digital StudioTM System Reference Manual The Turn off monitor option allows you to specify the period of inactivity (in minutes) that you want to elapse before your monitor turns off when your computer is running on AC power. The display reactivates when you move the mouse or press a key. The Turn off hard disks option allows you to specify the period of inactivity (in minutes) that you want to elapse before your hard disks turn off when your computer is running on AC power. When the values are lost, the BIOS values revert to their factory-default settings (see "Accessing the BIOS Setup Utility" on page 22). Do not handle damaged or leaking batteries. The lithium battery may explode if mistreated. Do not disassemble it or dispose of it in fire. 1 2 Reboot your computer by selecting Shut Down. . . from the Start menu, and then selecting Restart. If the error message "Error: Check date and time settings"appears during the reboot sequence, press F2 during the reboot process to access the BIOS Setup Utility. Otherwise it is not necessary to replace the battery at this time, and you can skip all remaining steps. Compare all the BIOS options to their default settings (see "CMOS Setup Options" on page 85). Make a list of all the BIOS options that are different from their default values. You will refer to this list when you restore the BIOS settings later. Select Exit Discarding Changes from the main menu using the right arrow key. [. . . ] The average data transfer rate is 22. 5X (3375 KBps). Data on a DVD-ROM is read at a variable transfer rate, ranging from 6. 6X at the innermost track to 16X at the outermost track. The average data transfer rate is 11. 3X (15255 KBps). ** Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 17. 5X at the innermost track to 40X at the outermost track. [. . . ]