User manual SONY FA-EB1AM

[. . . ] ⭠Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [. . . ] Before operating the product, please read this manual thoroughly and retain it for future reference. To reduce fire or shock hazard, do not expose the unit to rain or moisture. Tape over lithium battery contacts to avoid short-circuit when disposing of batteries, and follow local regulations for battery disposal. Keep batteries or things that could be swallowed away from young children. contact a doctor immediately if an object is swallowed. Immediately remove the batteries and discontinue use if. The product is dropped or subjected to an impact in which the interior is exposed. The product emits a strange smell, heat, or smoke. Electric shock may occur if a high voltage circuit inside the product is touched. 1 Turn the flash POWER off and remove the terminal cap from 2 Turn the flash POWER on. Then firmly insert the connector plug into the socket (Illustration ). This unit requires that the flash is powered by its own batteries. (Do not remove the batteries from the flash. 3 The camera is ready to take a picture when indicators appear in The charge lamp of this unit comes on during charging the flash. [. . . ] The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. batteries may become hot or explode due to improper use. Use only the batteries specified in this instruction manual. [. . . ]